Electro-Voice TL606DW specifications Specifications, Description, Applications

TL606DW

Low-Frequency

Speaker System

		•	Designed for cinema stage use
			(behind the screen), THX® approved1
		•	Extended, 40-Hz response (f3)
		•	Two premium DL15W long-throw woofers
		• Use as primary low-frequency source in
			two-way systems or as the subwoofer in
			multiway systems
		•	Side-mounted connection panel
			facilitates hookup when depth behind
			the screen is restricted
		• Optional XEQ-504 passive crossover
			replaces connection panel—works with
			DH1A driver on HP940 or HP9040 horn
		• Optional HS6 or HS7 hanging kits—
			through-the-box steel tubes provide safe
			suspension
		______________
		1. THX® is a registered trademark of Lucasfilm Ltd.
SPECIFICATIONS	Directivity Index Di, Median Over Indicated	Suspension (see Suspending TL606DW
Frequency Response, 10 Feet on Axis,	Range (see Figure 4),	Enclosures section):
Swept One-Third-Octave Pink Noise, Half-	40-125 Hz:		Two “independently certified” suspension
Space Anechoic Environment (see Figure	0.0 dB		kits are available, the HS6 and HS7
1):	400-800 Hz:	Optional Horn Mounting Kits:
40-3,500 Hz	7.5 dB		HMK-1 and HMK-2 (can be used with the
Low-Frequency 3-dB-Down Point, Normal:	Distortion, 0.1 Full Power Input (see		MP940 and HP9040 horns, respectively)
40 Hz	Figure 6),	Dimensions,
Usable Low-Frequency Limit (10-dB-down	Second Harmonic,		Height:
point), Normal:	100 Hz:		100.3 cm (39.5 in.)
30 Hz	0.45%		Width:
Half-Space Reference Efficiency:	500 Hz:		57.2 cm (22.5 in.)
5.8%	0.28%		Depth:
Long-Term Average Power Handling	Third Harmonic,		44.7 cm (17.6 in.)
Capacity per EIA Standard RS-426A (see	100 Hz:	Net Weight:
Power Handling Capacity section):	0.14%		49.0 kg (108 lb)
800 watts	500 Hz:	Shipping Weight:
Maximum Long-Term Average Mid-Baud	0.89%		54.4 kg (120 lb)
Acoustic Output:	Distortion, 0.01 Full Power Input
11.6 watts	(see Figure 5),	DESCRIPTION
Sound Pressure Level at 1 Meter, 1 Watt	Second Harmonic,	The Electro-Voice TL606DW is an optimally
Input, Anechoic Environment, Band-	100 Hz:	vented, direct-radiator speaker system for high-
Limited Pink-Noise Signal,	0.16%	output reproduction of low frequencies to 40
100-800 Hz:	500 Hz:	Hz. The TL606DW’s design is based on the
100 dB	0.1%	vented-enclosure modeling technique of A.N.
40-125 Hz:	Third Harmonic,	Thiele and R.H. Small, which makes possible a
96 dB	100 Hz:	combination of high efficiency, low distortion,
Dispersion Angle Included by 6-dB-Down	0.16%	and extended low-frequency performance in
Points on Polar Responses, Indicated	500 Hz:	an enclosure of moderate size.
One-Third-Octave Bands of Pink Noise	0.5%	The TL606DW employs dual DL15W very-low-
(see Figure 3),	Transducer Complement:
40-125 Hz Horizontal and Vertical:	Two DL15W’s	frequency reproducers in a 9-cubic-foot (255
360°	Box Tuning Frequency:	liter) enclosure. The DL15W’s high linear cone-
400-800 Hz Horizontal:	40 Hz	excursion ability (Xmax = 0.22 inches, zero to
110° ±12°	Impedance, Minimum:	peak) and 400-watt long-term average power
400-800 Hz Vertical:	4 ohms	capacity contribute substantially to the
46° ±13°	Input Connections:	TL606DW’s high acoustic output ability (see
Directivity Factor Rθ (Q), Median Over	Screw terminals (#8-32) on barrier strip	Power Handling Capacity section).
Indicated Range (see Figure 4),	Enclosure Materials and Finish:	APPLICATIONS
40-125 Hz:	Black, vinyl-clad particle board
		The TL606DW is ideally configured for a wide
1.0

400-800 Hz:	variety of high-output, low-frequency reinforce-
5.7