Xi-1122MHA/64F
12-InchTwo-Way, Half-Height, Mid-High 60° x 40° Sound Reinforcement System
Key Features:
•Compact/High-Level, Two-Way Design
•ND12A 12” Neodymium Mid-Bass Driver (60° x 40° Coverage)
•Coaxially-Mounted ND6-16 3” Diaphragm HF Compression Driver for Very High Output
•Fully Rotatable HF Section for Vertical or Horizontal Suspension
•Ring-Mode Decoupling / RMDTM
•Built-In L-Track Rigging
•Available in Black or White
•Footprint Identical to Xi-1153A, Xi-1183A, Xi-2153A, Xi-1191A, Xi-2181A, and Xi-2122MHA
General Description:
The Electro-Voice®Xi-1122MHA/64F is a mid-high, two-way, biamp system designed for medium- to long-throw applications. The ND6-16 high-frequency driver/horn combination is fully “shrouded” to preserve midbass wave- front detail. The ND12A 12-inch, application-specific mid- bass driver features RMD™ and a 60° x 40° horn. The 60° x 40° coverage pattern offers precise pattern control, and would be well suited for front-of-house, front-fill, side-fill and delay applications. When very high levels are desired we suggest augmenting with the Xi-1191A. Its high-frequency horn/driver section is rotatable to provide proper coverage for vertical or horizontal system installations. The Xi- 1122MHA/64F is a two-way system that requires an active electronic crossover. Both the Electro-Voice Dx38 and Klark Teknik DN9848 digital controllers are recommended for signal control. The Electro-Voice P3000 amplifier is recommended for powering the MB, and the P1200 is recommended for powering the HF of the Xi-1122MHA/46F.
Technical Specifications:
Freq. Response1 (-3 dB): | 110 Hz - 17 kHz |
Freq. Range1 (-10 dB): | 100 Hz - 19 kHz |
Max Calculated SPL2: | 139 dB |
Coverage: | 60° x 40° (Rotatable) |
| |
MB Power Handling: | 300W Continuous, 1200W Peak |
| |
HF Power Handling: | 75W Continuous, 300W Peak |
MB Sensitivity: | 110 dB, 1W/1m |
| |
HF Sensitivity: | 112 dB, 1W/1m |
| |
MB Impedance: | 8 ohms (Nominal) |
| |
HF Impedance: | 16 ohms (Nominal) |
| |
MB Transducer: | ND12A 12" (305mm) Driver, 8 ohms |
| |
HF Transducer: | ND6-16 3" (76mm) Diaphragm Comp. |
| Driver, 16 ohms |
| |
Crossover Frequency3: | Use Recommended Parameters |
Connectors: | Two Neutrik Speakon® NL8MPR |
| Paralleled |
| |
Enclosure Material: | 13-ply Birch plywood |
| |
Grille: | 16 GA steel |
| |
Dim (H x W x D): | 596 x 586 x 759 mm |
| (23.5" x 23.1" x 29.9") |
Net Weight: | 61.8 kg (136 lbs) |
| |
Shipping Weight: | 65.8 kg (145 lbs) |
| |
1Full Space measurement with a Dx38 Controller
2Max Calculated SPL of MB Section
3Download at www.electrovoice.com
