Electro-Voice XI-1152A/64F Dimension Drawings, Architectural & Engineering Specs

Models: XI-1152A/64F

1 4
Download 4 pages 7.93 Kb
Page 4
Image 4
Dimension Drawings:

Dimension Drawings:

CAUTION

This Xi Loudspeaker should be suspended overhead only in accordance with the procedures and limitations specified in the X-Array Xi Install Flying Manual and possible manual update notices. This system should be suspended with certified rigging hardware by an authorized rigging professional and in compliance with local, state, and federal overhead suspension ordinances.

Architectural & Engineering Specs:

PerformanceMatch

• P3000 (RL)

• CPS 2.8 • Dx38

• P1200 (RL)

• CPS 2.11

Xi-1152A/64F Part Numbers

1057-3430 - Black

1057-3431- White

The loudspeaker system shall be a two-way bi-amp system. The system shall have an 15-inch, low-frequency loudspeaker with a nominal impedance of 8 ohms and a 4-inch aluminum voice coil. The low-frequency driver shall have a power-handling capacity of 600 watts for 8 hours (as per ANSI/EIA RS-426 A & AES 2-1984). The high-frequency section shall employ a compression driver capable of handling 150 watts, 1,760- to 20,000-Hz when pink noise of a 6-dB crest factor is applied for 2 hours (as per AES 2-1984 and ANSI S4.26-1984 standards). The loudspeaker shall be constructed of 18-mm, 13-ply birch and shall be trapezoidal in shape. The wedge angle shall be 30-degrees. The grille shall be constructed from 16 GA powder-coated steel backed by acoustically transparent fabric. The system shall be capable of very-high level operation with a band width of 48 to 18,000 Hz. The system dimensions shall be 455 mm (17.90 inches) wide by 759 mm (29.88 inches) high by 414 mm (16.28 inches) deep. The system shall employ flying hardware of a “track” style, having two tracks on the enclosure top and two tracks on the enclosure bottom. The enclosure shall include a stand mount on the bottom of the enclosure. Net weight shall be 36.3 kg (80 lbs).

The loudspeaker shall be the Electro-Voice®Xi-1152A/64F.

12000 Portland Avenue South, Burnsville, MN 55337 Phone: 952/884-4051, Fax: 952/884-0043

www.electrovoice.com

© Telex Communications, Inc. 5/2004

Part Number 38110-272 Rev. A

U.S.A. and Canada only. For customer orders, contact Customer Service at:

800/392-3497 Fax: 800/955-6831 Europe, Africa, and Middle East only. For customer orders, contact Customer Service at:

+ 49 9421-706 0 Fax: + 49 9421-706 265 Other International locations. For customer orders, contact Customer Service at:

+ 1 952 884-4051 Fax: + 1 952 736-4212 For warranty repair or service information, contact the Service Repair department at:

800/685-2606 For technical assistance, contact Technical Support at: 866/78AUDIO

Specifications subject to change without notice.

Page 4
Image 4
Electro-Voice XI-1152A/64F technical specifications Dimension Drawings, Architectural & Engineering Specs, PerformanceMatch