Installation
Set the machine
upright and remove the two remaining bolts from the back.
Pull out the three plastic spacers from
the holes into which the bolts were fit- ted.
Plug the open holes with the plugs which you will find in the envelope con- taining the instruction booklet.
You are advised to keep all transit devices so that they can be refitted if the machine ever has to be transported again.
Positioning
Install the machine on a flat hard floor.
Make sure that air circulation around the machine is not impeded by carpets, rugs etc.
•Before placing it on small tiles, apply a rubber coating.
•Never try to correct any unevenness in the floor by putting pieces of wood, cardboard or similar materials under the machine.
•If it is impossible to avoid positioning the machine next to a gas cooker or
•The machine must not be installed in rooms where the temperature can drop below 0°C.
•The water inlet hose and the drain hose must not be kinked.
•Please ensure that when the appliance is installed, it is easily accessi- ble for the engineer in the event of a breakdown.
Levelling
Carefully level by screwing the adjustable feet in or out. Never place cardboard, wood or similar materials under the machine to compensate for any unevenness in the floor.
44
