26 Operating User Interface Features
Setting Preferences, con’t

INSTALL CYCLE

Run the INSTALL CYCLEbeforeoperatingthe
dryerthersttime.Removeallitemsfromthe
dryerdrumandpressstart. For more information
onperformingthedryerINSTALL CYCLE, refer to
the Installation Instructionsaccompanyingthis
dryer.
IfthedryerhasbeeninstalledaccordingtoIn-
stallation Instructions, INSTALL PASS!willbe
displayedandthedryerisreadytouse.
Ifthedryerwasnotinstalledproperly,SERVICE
CORD, NO GAS or CALL SERVICE 877 435
3287willbedisplayedtoindicatetheinstallation
error.
Theerrorsmayresultfromthefollowingcondi-
tions:
SERVICE CORD• (electricdryer)—Thepower
supplycordhasbeeninstalledimproperlyorthe
house wiring to the receptacle is incorrect.
NO GAS• (gasdryer)—Thereisnoconnection
betweenthedryerandthegaslineorthevalve
is closed.
CALL SERVICE• —
Errorcanonlybecorrectedby
callingaqualiedtechnician(1-877-435-3287).
Repeat the INSTALL CYCLE when corrections are
completed.
NOTE
The INSTALL CYCLEispromptedautomatically
onlyoncewhenthedryeristurnedontherst
timeattheendofinstallation.Afterthat,ifyou
wishtorunasubsequentINSTALL CYCLE when
movingthedryerormodifyingyourinstallation,
youmayperformyourownINSTALL CYCLE
byselectingitintheset prefs feature and then
following the screen prompts.