Wand and Hose Assembly
To install the power hose, align arrow (A) on hose with those on the suction end of cleaner. Insert hose until it clicks. To remove, press release tab (B) and pull hose out. Slip small accessories on end of wand or directly on hose handle and twist slightly to secure.
(A) Alignment
Mark
(B)Release Tab
Crevice tool for narrow spaces.
Shown for dusting.
Reversed for fabrics.
CAUTION: Turn cleaner OFF before connecting or disconnecting wands and power nozzle.
To assemble wand, insert the lower wand, large end first, into sheath until latches engage (Fig. A). NOTE: Before assem- bling wand, check that the electric cord connector at end of sheath is properly positioned in its receptacle (Fig. B).
Fig. A
Fig. B
To connect hose handgrip to the sheath wand, align electrical connections on underside of sheath wand and hose handgrip, and insert until latch clicks (Fig. C). To remove, press latch and pull wand out (Fig. D).
Fig. C
Fig. D
4
