Electrolux 241737900 manual Door Opening, Removing And Replacing The Toe Grille, Leveling

Installation 5

Door Opening

Your refrigerator should be positioned to allow easy access to a counter when removing food. For best use of drawers and freezer baskets, the refrigerator should be in a position where both the refrigerator and freezer doors can be fully opened.

NOTE

If your refrigerator is placed with the door hinge side against a wall, you may have to allow additional space so the door can be opened wider.

Removing And Replacing The Toe Grille

To remove the toe grille:

1Open freezer and refrigerator compartment doors.

2Remove the screw from each side of the toe grille.

3 Pull the toe grille forward and lift it off. Reverse these instructions to install the toe grille.

Leveling

All four corners of your refrigerator must rest firmly on a solid floor. Your refrigerator is equipped with adjustable front rollers to help level your unit. To ensure proper door seal and assist door closing, the refrigerator should be tilted 6 mm (1/4 inch), front to back.

To level your refrigerator:

1 Remove toe grille (see above) to access the front rollers.

2Adjust the rollers by turning each roller adjustment bolt with a wrench until the refrigerator is level and stable.

3 Check both doors to be sure seals touch cabinet on all four sides.

4 Replace the toe grille.

Tips:

•If the freezer door is higher than the refrigerator door, raise the right corner and/or lower the left corner until the doors align across the top of the cabinet.

•If the refrigerator door is higher than the freezer door, raise the left corner and/or lower the right corner until doors align across the top of the cabinet.