15
!
CACA
CACA
CAUTIONUTION
UTIONUTION
UTION
- Use caution when replacing the burner head so the electrode is not damaged. A damaged
electrode may cause a delayed ignition or prevent the burner from igniting
- Any additions, changes or conversions required in order for this appliance to perform
satisfactorily must be made by a qualified service technician.
Figure 1
General Care & Cleaning
General Care & Cleaning
General Care & Cleaning
CLEANING THE BURNER GRATES, BURNER CAPS,BURNER HEADS, SIMMER PLATE AND GRIDDLE
The Burner Grates, Burner Caps, Burner Heads, simmer plate
and griddle should be routinely cleaned. Keeping the burner
ports clean will prevent improper ignition and an uneven
flame.
Refer to the following instructions:
To Remove and Replace the Surface Burner Grate,
Surface Burner Cap and Surface Burner Head - Remove
in the following order; (1st) Surface Burner Grate, (2nd)
Surface Burner Cap, (3rd) Surface Burner Head (if not
screwed) (See Figure 1).
Reverse the procedure above to replace the Surface Burner Cap,
Surface Burner Head and Surface Burner Grate. Do not remove any
burner parts from the cooktop until the burner parts have
completely cooled and are safe to handle. Do not operate the
surface burners without the Surface Burner Caps, Surface Burner
Heads and Surface Burner Grates properly in place.
To Clean the Burner Caps, Burner Heads, Burner Grates, Simmer
Plate and Gridlle - Use a soap-filled scouring pad or a mild abrasive
cleaner to clean the surface burner caps and surface burner heads. The
Grates, Simmer Plates and Griddle are designed to be Dishwasher safe
for cleaning. The ports (or slots) around the burner heads must be routinely cleaned. If
residue still remains in these ports, use a small-gauge wire or needle to clean the slots or
holes being careful not to damage the electrode. For proper flow of gas and ignition of the
burner—DO NOT ALLOW SPILLS, FOOD, CLEANING AGENTS OR ANY OTHER
MATERIAL TO ENTER THE GAS ORIFICE HOLDER OPENING. ALWAYS make sure
that the surface burner cap, the surface burner head and the surface burner grate are
properly in place whenever a surface burner is in use.
1st 2nd
3rd
Surface
Burner
Head
Surface
Burner
Cap
Surface Burner Grate
Surface Burner
Grate
Surface Burner
Heads
THE COOKTOP IS NOT REMOVABLE. Do not attempt to remove or lift the cooktop.
Surface Burner
Caps