User's instructions

Starting the wash programme

1. Check that the water tap is open.

2.To start the wash programme, press the START/PAUSE pushbutton "". The wash programme starts.

If the END light "" flashes 4 times and an acoustic signal is emitted 4 times* when the START/PAUSE pushbutton "" is pressed, the lid is not properly closed. In this case, push the lid in firmly, and press the START/ PAUSE pushbutton "" again.

* Depending on the model, some acoustic signals may appear.

Programme progress

Programme progress display

Prior to the start, the chosen programme stepd are displayed by the programme progress display. During the wash programme, the current programme step is displayed.

Changing the washing programme

Changing or cancelling the programme

1.Press the START/PAUSE pushbutton "".

2.Turn the programme selector to the OFF position "". The washing programme is cancelled.

3.Set another washing programme, if required.

Otherwise, turn the programme selector to the DRAIN " " or SPIN "" programmes and press the START/PAUSE pushbutton "".

The washing programme can be temporarily interrupted at any time by pressing the START/PAUSE pushbutton "". It is then re-started by pressing the pushbutton again. A washing programme can only be changed after the programme selector has been turned to the OFF position "".

Selecting a programme option

The programme option QUICK "" can still be selected after the programme has started.

1.Press the START/PAUSE pushbutton "".

2.Press the QUICK pushbutton "".

3.Press the START/PAUSE pushbutton "". The washing programme goes on.

23

Page 23
Image 23
Electrolux 42230 manual Starting the wash programme, Programme progress, Changing the washing programme