Electrolux 5041 Installation and connection instructions, Fitting under a counter, Levelling

Models: 5041

1 36
Download 36 pages 62.2 Kb
Page 31
Image 31

Installation and connection instructions

Fitting under a counter

(kitchen worktop or sink)

By removing the machine’s worktop, you can install it under a close fitting sink unit or a pre-existing top, providing the dimensions of the recess correspond to those shown in the picture.

Proceed as follows:

-Remove the machine’s worktop by unscrewing the two rear retaining screws, pull from the front and slide out the rear slots, lifting the worktop.

570

-

 

600

820

 

600

 

IN05

 

Insert the machine after adjusting height and

levelling with the adjustable feet. When inserting the machine, ensure that the water inlet and drain hoses are not kinked or squashed.

Levelling

Good levelling is essential for correct closure and sealing of the door.

When the appliance is correctly levelled, the door will not catch on the levelling spacers on either side of the cabinet.

If the door does not close correctly, loosen or tighten the adjustable feet until the machine is perfectly level.

IN06

IN07

31

Page 31
Image 31
Electrolux 5041 Installation and connection instructions, Fitting under a counter, Levelling, Proceed as follows