What to do if… 29
3.Remove the water inlet and discharge hoses.
4.Pull the machine out together with the hoses. Avoid over tilting the machine during transportation.
What to do if…
The dishwasher will not start or stops during operation. Certain problems are due to the lack of simple maintenance or oversights, which can be solved with the help of the indications described in the chart, without calling out an engineer.
Switch off the dishwasher and carry out the following suggested corrective actions.
Fault code and malfunction |
| Possible cause and solution |
appears in the digital display. | • | The water tap is blocked or furred with lime- |
The dishwasher does not fill with water. |
| scale. |
| Clean the water tap. | |
|
| |
| • The water tap is turned off. Turn the water tap | |
|
| on. |
| • The filter (where present) in the threaded hose | |
|
| fitting at the water inlet valve is blocked. |
|
| Clean the filter in the threaded hose. |
| • | The water inlet hose has not been correctly |
|
| laid or it is bent or squashed. |
|
| Check the water drain hose connection. |
appears in the digital display. | • | The sink spigot is blocked. |
The dishwasher will not drain. |
| Clean out the sink spigot. |
| • | The water drain hose has not been correctly |
|
| laid or it is bent or squashed. |
|
| Check the water drain hose connection. |
appears in the digital display. | • | Close the water tap and contact your local |
| Service Force Centre. | |
|
| |
