Installation Instructions
Safety instructions
The laws, ordinances, directives and standards in force in the country of use are to be followed (safety regulations, proper recycling in accord- ance with the regulations, etc.)
Installation may only be carried out by a qualified electrician.
The minimum distances to other appliances and units are to be ob- served.
Drawers may only be installed under the appliance with a protec- tive floor.
The cut surfaces of the worktop are to be protected against moisture using a suitable sealant.
The sealant seals the appliance to the work top with no gap.
Do not use silicon sealant between the appliance and the work top. Avoid installing the appliance next to doors and under windows. Other- wise hot cookware may be knocked off the rings when doors and win- dows are opened.
1Warning!
Risk of injury from electrical current. The combination appliance is live.
•Observe electrical safety rules.
•Ensure
•Rated voltage of the combined appliances must match.
1Important!
Risk of injury from electrical current.
Loose and inappropriate plug and socket connections can lead to overheating of the plug.
•Fit plug and socket connections together properly.
A device must be provided in the electrical installation which allows the appliance to be disconnected from the mains at all poles with a contact opening width of at least 3 mm.
Suitable isolation devices include line protecting
Move the oven steam outlet pipe with a screwdriver to the centre of the opening in the hob. Then put the outlet connection piece over the pipe.
1• Moving the panel ring under pressure can scratch the coated metal surfaces.
13
