Changing the Light Bulb
Warning! There is a risk of electric shocks! Before changing the light bulb, switch off the appliance and unplug it, or disconnect from the power supply.
Light bulb data:
☞1. To switch off the appliance, turn the thermostat knob to position "0".
2.Unplug the mains plug.
3.To change the light bulb, undo the
screw.
4. Press the light bulb cover as shown and slide it backwards.
5.Change the defective light bulb.
6.Refit the light bulb cover and the screw.
7.Put the refrigerator back into operation.
Noises During Operation
The following noises are characteristic of refrigeration appliances:
•Clicks
Whenever the compressor switches on or off, a click can be heard.
•Humming
As soon as the compressor is in operation, you can hear it humming.
•Bubbling/Splashing
When refrigerant flows into thin tubes, you can hear bubbling or splashing noises. Even after the compressor has been switched off, this noise can be heard for a short time.
Regulations, Standards, Guidelines
22
This appliance was designed for household use and was manufactured in accordance with the appropriate standards. The necessary measures in accordance with appliance safety legislation regulations (GSG), acci- dent prevention regulations for refrigeration appliances (VBG 20) and the regulations of the German Society of Electrical Engineers (VDE) were observed in the manufacture of this appliance.
The refrigerant circuit has been checked for leaks.
