3
IMPORTANT SAFETY INSTRUCTIONS

Prior to Installation

Check the appliance for transport damage. Under
no circumstance should a damaged appliance be
installed. In the event of damage please contact
your retailer.

Installation

This appliance is heavy. Care should be taken
when moving it.
It is dangerous to alter the specifications or
attempt to modify this product in any way.
Ensure that the appliance does not stand on the
electrical supply cable.
Important: if the supply cable is damaged, it must
be replaced by authorised service or qualified per-
sonnel using a special cable of the same type.
Any electrical work required to install this appli-
ance should be carried out by a qualified electri-
cian or competent person.
Parts which heat up should not be exposed.
Whenever possible, the back of the appliance
should be close to a wall, but leaving the required
distance for ventilation, as stated in the installa-
tion instructions.
The appliance should be left for 2 hours after
installation before it is turned on, in order to allow
the refrigerant to settle.

Refrigerant

The refrigerant isobutane (R600a) is contained
within the refrigerant circuit of the appliance, a
natural gas with a high level of environmental
compatibility, which is nevertheless flammable.
During transportation and installation of the appli-
ance, be certain that none of the components of
the refrigerant circuit become damaged.
If the refrigerant circuit should become damaged:
- avoid open flames and sources of ignition.
- thoroughly ventilate the room in which the
appliance is situated.

Child Safety

Do not allow children to tamper with the controls
or play with the product.
There is a risk of suffocation! Keep packaging
material away from children!

General Safety

This appliance contains hydrocarbons in its
cooling unit; maintenance and recharging
must therefore only be carried out by autho-
rised technicians.
Take utmost care when handling your appli-
ance so as not to cause any damages to the
cooling unit with consequent possible fluid
leakages.
The appliance must not be located close to
radiators or boilers.
Avoid prolonged exposure of the appliance to
direct sunlight.
Do not use other electrical appliances (such
as ice cream makers) inside of refrigerating
appliances.

During Use

This appliance is designed for domestic use only,
specifically for the storage of edible foodstuffs. It
is not intended for commercial or industrial use.
Containers with flammable gases or liquids can
leak at low temperatures. Do not store any con-
tainers with flammable materials, such as spray
cans, fire extinguisher refill cartridges etc. in the
refrigerator.

Maintenance and Cleaning

Before cleaning, always switch off the appliance
and disconnect from the electrical supply.
When unplugging always pull the plug from the
mains socket, do not pull on the cable.

Servicing

This product should be serviced by an authorised
engineer and only genuine spare parts should be
used.
Under no circumstances should you attempt to
repair the appliance yourself. Repairs carried out
by inexperienced persons may cause injury or
serious malfunctioning. Contact your local Service
Force Centre.

At the end of the Appliance Life

When disposing of your appliance use an autho-
rised disposal site.
Remove the plug and ensure that any locks or
catches are removed, to prevent young children
being trapped inside.
These warnings are provided in the interests of your safety. Ensure that you understand them all
before installing or using this appliance. Your safety is of paramount importance. If you are unsure
about any of the meanings of these warnings contact the Customer Care Department.