18 818 33 28-00/7
Temperature Display
The temperature display can indicate several pieces
of information.
• During normal operation, the temperature currently present in the
refrigerator (ACTUAL temperature) is displayed.
• When the temperature is being adjusted a flashing display indicates
the fridge compartment temperature currently set (DESIRED temper-
ature).
• If there is a fault in the appliance the temperature display shows a
square or a letter in the temperature display.
ALARM OFF button
With the ALARM OFF button, the acoustic warning signal
can be switched off, e.g. the "Open Door" warning when
sorting in or out, the food to be chilled.
Prior to Initial Start–Up1
Before connecting the appliance to the mains and starting it for the
first time, leave the appliance to stand for 30 minutes if was
transported upright. After transporting it on its side, the appliance
must be left to stand for 2 hours before switching it on. This is
necessary to allow the refrigerant to flow back into the compressor.
Otherwise the compressor may be damaged.
0 1. Please clean the appliance interior and all accessories prior to initial
start-up (see section: “Maintenance and Cleaning”).
2. The appliance must be correctly installed in accordance with the chap-
ter "Installation" before it is switched on for the first time. Care should
be especially taken that the mains voltage and frequency available cor-
respond with the appliance’s rating plate.