Operating Instructions

 

 

 

 

 

 

Problem

Possible Cause

Remedy

 

 

 

Water tap is closed.

Open the water tap.

 

 

No water flows.

 

Close the water tap. Unscrew

 

 

Filter in screw connection of

the hose from the tap, re-

 

 

Fault code E10 ap-

 

 

the inlet hose is blocked.

move the filter and clean un-

 

 

pears. The display

 

 

 

der running water

 

 

RINSE + flashes

 

 

 

 

 

 

 

 

Water tap is blocked with

Check the water tap and have

 

 

 

limescale or is faulty.

it repaired if necessary.

 

 

 

The transport packaging has

Remove transport packaging

 

 

 

according to the installation

 

 

 

not been removed.

 

 

 

and connection instructions.

 

 

 

 

 

 

 

 

Adjust the feet according to

 

 

 

The machine is not level.

the installation and connec-

 

 

 

 

tion instructions.

 

 

The washing machine

There is very little washing in

This does not impair the op-

 

 

vibrates during opera-

 

 

the drum (e.g. only one

 

 

tion or is unstable.

eration of the machine.

 

 

dressing gown).

 

 

 

 

 

 

 

The water could not be com-

Check the the drain hose and

 

 

 

remove any kink if necessary,

 

 

 

pletely pumped out before

or clean the drain pump and,

 

 

 

spinning because the drain-

 

 

 

if required, remove foreign

 

 

 

age hose is kinked or the

 

 

 

bodies from the pump hous-

 

 

 

drain pump is blocked.

 

 

 

ing.

 

 

 

 

 

 

 

 

It may be necessary to re-

 

 

Excessive foaming dur-

Probably too much detergent

duce the amount of deter-

 

 

gent used. Follow the

 

 

ing the main wash.

was used.

 

 

detergent manufacturer's

 

 

 

 

 

 

 

 

recommendations.

 

 

 

 

 

 

 

 

 

 

 

31

Page 31
Image 31
Electrolux 74630 Water tap is closed Open the water tap No water flows, Limescale or is faulty It repaired if necessary