Temperature setting buttons
The temperature is adjusted using the “B“ and “D“ buttons. These buttons are connected to the temperature display.
•The temperature display is switched over from the display of the ACTUAL temperature (Temperature display is illuminated) to the display of the DESIRED temperature (Temperature display flashes) by pressing one of the two buttons, “C“ or “E“.
•Each time one of the two buttons is pressed again the DESIRED temperature is adjusted by 1 °C. The DESIRED temperature must be reached within 24 hours.
If neither button is pressed, the temperature display automatically switches back after a short period (approx. 5 sec.) to the display of the ACTUAL temperature.
DESIRED temperature means:
The temperature that has been selected for inside the freezer. The DESIRED temperature is indicated by flashing numbers.
ACTUAL temperature means:
The temperature display indicates the current temperature inside the freezer. The ACTUAL temperature is indicated with illuminated numbers.
Select "Freezing" or "Cooling"
If necessary, switch over the appliance with the following steps between the operating modes "Freezing" and "Cooling":
1.Hold down the SUPER button and the “+“ (WARMER) button simultaneously for 5 seconds.
•When the setting is switched from “Freezing” to “Cooling” “FC” (Freezing - Cooling) appears in the temperature display, an acoustic signal confirms the change and the temperature display changes to flashing figures (DESIRED temperature cooling mode +5 °C). Using the temperature setting buttons, the required temperature for the cooling mode can now be entered.
•When the setting is switched from “Cooling” to “Freezing” “CF” (Cooling
-Freezing) appears in the temperature display, an acoustic signal confirms the change and the temperature display changes to flashing figures (DESIRED temperature freezing mode
The operation mode, in which your appliance is at the moment, is identifiable if the temperatures can be set above or below 0 °C.
2. Set the temperature depending upon the selected operation mode (see
8
the chapter "Temperature Adjustment").
