Residual Heat Indicator
When an individual cooking zone or the entire hob is switched off, any residual heat is shown with an h (for
“Hot”) in the digital display for the appropriate cooking zones.
Even after the cooking zone has been switched off, the
residual heat indicator only goes out when the cooking zone is cold.
2 You can use the residual heat for melting and keeping food warm.
1 Important! As long as the residual heat indicator is illuminated, there is a risk of burns.
1 Important! If the power supply is interrupted the h symbol will also go out and information about residual heat will no longer be available. However, it is still possible to burn yourself. This can be avoided by tak- ing care around the hob.
Cooking using the automatic warm up function
All of the cooking surface’s four cooking zones can be adjusted to any of nine settings, and are equipped with an automatic warm up func- tion:
– ¿, lowest heat setting
– Ç, highest heat setting
– a, automatic warm up function.
When you select the desired heat setting using the heat setting se- lector sensor panel, the cooking zone will operate at maximum power for a certain period of time and will then automatically switch back to the follow-on heat setting that has been set.
The length of time that the automatic warm up function operates de- pends on the follow-on heat setting selected.
1. Touch the heat setting selector sensor panel to set the desired heat setting from ¿ to Æ. The heat setting that has been set will then be displayed. After a period of 5 seconds, the a (=automatic warm up function) will appear in the display in place of the heat setting. After
14