Manuals / Electrolux / Kitchen Appliance / Refrigerator

Electrolux 818 20 85 operating instructions Prior to Initial Start-Up

Models: 818 20 85

1 44

Download 44 pages 27.63 Kb

Page 21

Prior to Initial Start-Up

Prior to Initial Start-Up

1 Before connecting the appliance to the mains and putting it into ope- ration for the first time, leave the appliance to stand for 30 minutes if it was transported upright. After transport on its side, the appliance must be left to stand for 2 hours before putting it into operation. This is necessary to allow the oil to flow back into the compressor. Otherwise the compressor may be damaged.

01. Please clean the appliance interior and all accessories prior to initial start-up (see section: "Maintenance and Cleaning").

2.Remove the cold accumulation block from the freezer tray.

3.Place the cold accumulation block into a compartment or drawer only after the optimal storage temperature of -18 °C has been reached, and allow to freeze.

4.After 24 hours place the cold accumulation block in the freezer tray or in the front of the upper drawer.

5.Re-freeze the thawed cold accumulation block in the same fashion, e.g. after cleaning the appliance.

818 20 85-01/2

21

Image 21

Electrolux 818 20 85 operating instructions Prior to Initial Start-Up

Contents

SANTO Electronic Refrigerator/Freezer Combination Operating Instructions818 20 85 - 01/2 Dear customer Contents Initial Start-Up Temperature AdjustmentSwitching the Appliance Off Holiday Mode Preparation of Ice Cubes Storage Goods Symbols/Freezing Calendar ContentsGuarantee Conditions Service & Spare Parts Control and Information Systems Open Door Warning Temperature WarningPrior to Installation 1 Important Safety InstructionsInstallation RefrigerantMaintenance and Cleaning Child SafetyDuring Use ServicingEnvironmental Information PackagingOld Appliances Appliance Transport Before UsePackaging Remove the transport fittings from the storage shelves Installation Installation LocationFitting the Door Handles Appliance Alignment The refrigerator/freezer needs air1 WARNING - THIS APPLIANCE MUST BE EARTHED Electrical Connection1 Warning! Unplug from the mains, before reversing the door Reversing The Doorbracket cover on the plinth from the left to the right 2. Close the freezer compartment8. Move the upper hinge bracket pivot to the left 5. Unscrew the centre door hinge bracket11. Turn the handle bracket with the 13. Carefully slide the fridge com- partment door onto the top hinge bracket pivot and close Appliance Description View of Appliance➀ ➁ ➂ ➃ ➄ ➅ ➆ ➇ Freezer tray with Cold Accumulation Block Control Panel Temperature Displays Temperature setting buttonsPrior to Initial Start-Up Initial Start-Up Refrigerator Start-UpFreezer Compartment Start-Up Temperature Adjustment COOLMATIC/FROSTMATIC COOLMATICFROSTMATIC If the appliance is not to be used for an extended period Switching the Appliance OffHoliday Mode Open Door Warning Control and Information SystemsTemperature Warning For the fridgeFunction Errors Opening the Freezer Compartment DoorFor the freezer Interior Accessories Storage ShelvesBottle rack Drawers and Compartments Variable Inner DoorBottle Holder Vario drawer-setCorrect storage Freezing Frozen Storage Preparation of Ice CubesTips Defrosting Storage Goods Symbols/Freezing CalendarThe refrigerator is defrosted automatically Freezer Compartment Defrostingthe plinth see Reversing the Door section. Place the bottom drawer 1 WarningHints and Tips 2 Energy Saving AdviceNormal Operating Sounds Food StorageMaintenance and Cleaning Internal Cleaning1 Warning External Cleaning Replacing the light bulb1 Warning Correcting Malfunctions What to do ifRegulations, Standards, Guidelines Refrigerant Circuit Technical TerminologyEvaporator CompressorEuropean Guarantee Guarantee ConditionsService & Spare Parts 08705 929Customer Care AEG Hausgeräte GmbH Postfach D-90327 Nürnberg Copyright by AEG818 2085 - 01/2