Operating Instructions
10
Prior to using for the first time Prior to using for the first time, remove all the clips with which the dish
racks are secured for transport.
Then perform the following steps:
0 1. Adjust the water softener
2. Fill with Salt for the Water Softener
3. Fill with Rinse Aid
Adjusting the Water Softener
To prevent the build up of scale on dishes and in the dishwasher, the
dishes must be washed with soft, i.e. low lime content water. For this
reason the dishwasher is fitted with a water softener in which tap
water from a hardness of 4 °d (German degree) is softened with the aid
of special salt.
3 Your local water authority can advise you on the hardness of the water
in your area.
0 Adjust the water softener as stated in the table to the setting that cor-
responds to the hardness of the water in your area. The water softener
can be set manually using the water hardness switch and also electron-
ically using the buttons on the control panel.
Water Hardness Hardness Setting Number of
Flashes
in °d1) in ppm2) Range Manual Electronic
51 - 70
43 - 50
37 - 42
29 - 36
23 - 28
9,0 - 12,5
7,6 - 8,9
6,5 - 7,5
5,1 - 6,4
4,0 - 5,0
IV 1
9
8
7
6
5
9
8
7
6
5
0*
19 - 22
15 - 18
3,3 - 3,9
2,6 - 3,2 III 4
3*
4
3
11 - 14 1,9 - 2,5 II 2 2
4 - 10 0,7 - 1,8 I/II 1 1
under 4 under 0.7 I
0
no salt
necessary
10