Starting a programme

1.Check that the water tap is open.

2.Press the START/PAUSE key.

The programme is started or it starts after the time delay set has elapsed.

3 If after pressing the START/PAUSE key the display shows “Door not Closed”, the door has not been shut properly. Push the door firmly closed and press the START/PAUSE key again.

Programme progress

The display indicates the stage of the programme that is currently being performed as well as the time to the end of the programme.

LINEN/EASY CARES

12.45

Washing

14.37

50C 800

aýýýýýaýaýaýaýaýaýaýaýa

 

 

 

TEMP.

RPM OPTIONS OK

TIME

3 During the wash cycle the

time to the end of the programme may change as the

programme adjusts itself to different conditions (e. g., type and quantity of laundry, out of balance spin detection, special rinses, etc.).

Interrupting a programme/Adding washing

Interrupting a programme

•The programme can be interrupted at any time by pressing the START/ PAUSE key. It is then re-started by pressing the key again.

•To stop the washing machine before the programme has ended, turn the programme knob to OFF.

Attention! Be careful if there is water in the appliance!

Adding washing

1.Press the START/PAUSE key.

•If “Door locked” and “Pause” are alternately shown in the display, it is no longer possible to add washing, e. g. when the water level is too high.

•If “Door unlocked” and “Pause” are alternately shown in the display, it is still possible to add washing:

2.Open the door.

3.Add washing and close the door again.

4.Press the START/PAUSE key again. The programme continues.

19