What to do if...

Remedying small malfunctions

If while the appliance is operating a short acoustic signal sounds 3 times and one of the following messages appears in the display:

“No incoming water/Check tap & Hose”,

“No drain/Check drain hose/filter” or “Pump Blocked”,

“Door not Closed”,

please have a look at the following table.

When the fault is remedied, press the START/PAUSE key.

If “Warning: E and number or letter” is displayed: Switch the appliance off and on again. Re-set the programme. Press the START/PAUSE key. If the warning is displayed again, please contact the Service Force Centre and inform them of the warning.

Problem

Possible cause

Remedy

 

Mains plug not plugged

Plug in mains plug. Check

 

in or fuse not working.

fuse.

Washing machine does not

Door not closed properly.

Close door - there should be

work.

 

an audible click.

 

 

 

START/PAUSE key was

Press START/PAUSE key for

 

not pressed for long

 

longer.

 

enough.

 

 

The door cannot be closed.

Child safety device en-

Release the child safety de-

gaged.

vice.

 

The selected function

 

Display shows: ”Selection

cannot be combined

Make another selection.

error”.

with other programme

 

 

settings.

 

Display shows: “Door not

Door not closed properly.

Close door - there should be

an audible click.

Closed/Please check”

 

Start programme again.

 

 

 

Tap turned off.

Turn the tap on.

Display shows: “No incom-

The filter in the threaded

Turn off the tap. Unscrew the

inlet hose fitting is

hose, take out the filter and

ing water/Check tap &

blocked.

clean it.

Hose”

 

 

 

Water tap is blocked

Check the water tap and have

 

with limescale or faulty.

it repaired if necessary.

 

 

 

27