6.Connect anti-sway bar to chassis bracket and secure with retainer spring.

7.Push clutch cable housing guide into bracket, slide collar onto guide and secure with large retainer spring.

8.Place flat washer and clutch spring on idler pulley bolt and secure with small retainer spring.

9.Install belt onto engine pulley.

TO LEVEL MOWER HOUSING

Adjust the mower while tractor is parked on level ground or driveway. Make sure tires are properly inflated (See “PROD- UCT SPECIFICATIONS” section of this manual). If tires are over or underinflated, you will not properly adjust your mower.

SIDE-TO-SIDE ADJUSTMENT

•Raise mower to its highest position.

•At the midpoint of both sides of mower, measure height from bottom edge of mower to ground. Distance “A” on both sides of mower should be the same or within 1/4" of each other.

•If adjustment is necessary, make adjust- ment on one side of mower only.

•To raise one side of mower, tighten lift link adjustment nut on that side.

•To lower one side of mower, loosen lift link adjustment nut on that side.

NOTE: Each full turn of adjustment nut will change mower height about 1/8".

• Recheck measurements after adjusting.

Bottom edge of

Bottom edge of

mower to ground

mower to ground

A

Ground Line

A

Suspension Arm

Lift Link Adjustment Nut

FRONT-TO-BACK ADJUSTMENT IMPORTANT: Deck must be level side-to side. If the following front-to-back adjust- ment is necessary, be sure to adjust both front links equally so mower will stay level side-to-side.

To obtain the best cutting results, the mower housing should be adjusted so that the front is approximately 1/8" to 1/2" lower than the rear when the mower is in its highest position.

Check adjustment on right side of trac- tor. Measure distance “D” directly in front and behind the mandrel at bottom edge of mower housing as shown.

•Before making any necessary adjust- ments, check that both front links are equal in length.

•If links are not equal in length, adjust one link to same length as other link.

•To lower front of mower loosen nut “E” on both front links an equal number of turns.

•When distance “D” is 1/8" to 1/2"

lower at front than rear, tighten nuts “F” against trunnion on both front links.

•To raise front of mower, loosen nut “F” from trunnion on both front links. Tighten nut “E” on both front links an equal num- ber of turns. The two front links must remain equal in length.

•When distance “D” is 1/8" to 1/2" lower at front than rear, tighten nut “F” against trunnion on both front links.

•Recheck side-to-side adjustment.

Mandrel

“D” “D”

Both Front Links Should be Equal in Length

Nut “F”

Nut “E”

 

Trunnion

 

Front Links

22

Page 21 Page 23
Page 22
Image 22
Electrolux AG15538B manual To Level Mower Housing, SIDE-TO-SIDE Adjustment
Page 21 Page 23

AG15538B specifications

The Electrolux AG15538B is a powerful vacuum cleaner designed to meet the needs of modern households. With its sleek, ergonomic design and advanced technologies, this model stands out in the crowded market of home cleaning appliances.

One of the standout features of the AG15538B is its powerful motor that ensures strong suction capabilities. This vacuum cleaner is engineered to efficiently pick up dust, dirt, and allergens from various floor types, including carpets, hardwood, and tiles. The multi-surface cleaning capabilities make it an ideal choice for homes with diverse flooring.

The AG15538B is equipped with a range of innovative technologies that enhance its performance. The innovative dust container is designed for easy emptying, allowing users to maintain cleanliness without the hassle of dealing with messy bags. This not only saves time but also reduces the cost of purchasing replacement bags. Additionally, the vacuum features a built-in HEPA filter, effectively trapping microscopic dust particles and allergens to provide cleaner air quality in your home.

Another remarkable aspect of the Electrolux AG15538B is its lightweight construction, making it easy to maneuver around the house. The vacuum is designed for user comfort, featuring an ergonomic handle that fits comfortably in the hand, reducing strain during cleaning sessions. With its compact design, storage is also made simple, allowing users to easily tuck it away when not in use.

Versatility is further supported by the variety of attachments that come with the AG15538B. These include specialized brushes for upholstery, crevice tools for tight spaces, and extension tubes that allow for easy cleaning of high surfaces such as ceilings and ceiling fans. The vacuum cleaner adapts to different cleaning needs, making it a versatile tool in maintaining a spotless home.

Battery life is another critical feature of the AG15538B. It boasts a long-lasting charge that enables extensive cleaning sessions without frequent interruptions for recharging. This makes it an excellent option for larger homes or for those who prefer to clean in one go.

In conclusion, the Electrolux AG15538B combines powerful suction, advanced filtration technologies, user-friendly design, and versatility to deliver an exceptional cleaning experience. Whether dealing with pet hair, allergens, or everyday dirt, this vacuum cleaner provides a comprehensive solution for all cleaning challenges, making it a valuable addition to any household.
Top Page Image Contents