![](/images/new-backgrounds/1255034/25503423x1.webp)
40 use
To restart the programme from the point at which it was interrupted, press the “start/pause” button again.
If you have chosen a delayed start, the machine will begin the countdown.
If an incorrect option is selected, an integrated red pilot light of the “start/ pause” button flashes for 3 times.
Select the Delay start
Important!
•The selected delay can be changed only after selecting the washing programme again.
•The door will be locked throughout the delay time. If you need to open the door, you must first set the washing machine to PAUSE by pressing the Start/Pause button and then wait about 2 minutes. After you have closed the door, press the Start/Pause button again.
The Delay Start can not be selected with Spin and Drain programmes.
Programme progress display
Before you start the programme, if you wish to delay the start, press the Delay Start button repeatedly, to select the desired delay. The relevant light illuminates.
This button makes it possible to delay the starting of the washing programme by 9, 6 and 3 hours.
You must select this option after you have set the programme and before you press the Start/Pause button.
You can cancel the delay time at any moment, before you press the Start/Pause button.
If you have already pressed the Start/Pause button, and you wish to cancel the delay time, proceed as follows:
•set the washing machine to PAUSE by pressing the Start/Pause button;
•press the Delay Start button once, the light relevant to the selected delay goes off.
•press the Start/Pause button again to start the programme.
By selecting the wash programme, the “wash” pilot lights comes on. When the pilot light “wash” comes on this means that the machine is performing the washing cycle. If you have selected the “prewash” function, this light will be on during the prewash phase too.
The “door” pilot light indicates if the door can be opened:
•light on: the door cannot be opened
•light off: the door can be opened
•flashing light: the door is opening
It stays on during the whole programme indicating that the door is locked. When the light goes out, the door can be opened.
When the programme has finished, the “End” pilot light comes on.