Electrolux Built-In Dishwasher 8

8Operating Instructions

To run your dishwasher, follow these basic steps:

1Load dishwasher. (See Preparing and Loading Dishes, pages 13-16.)

2Add detergent. (See Dishwasher Dispenser & Detergents, pages 17-18.)

3Add rinse aid, if needed. (See Rinse Aid, page 19.)

4Select desired CYCLE. (See Cycle Selections, page 9.)

The light surrounding the pad glows when selected.

5Select desired OPTIONS. (See Energy Options Selections, page 10.)

The light surrounding the pad will glow when selected.

6To start, press START/CANCEL pad and close door. (See Start/Cancel,

page11.)

Your dishwasher uses energy efficient motors for the wash and drain portions of

the cycle you select. Each cycle has a series of water fills and drains for washing

and rinsing dishes. As each cycle begins, you may–or may not–hear the drain

motor. You may also hear the splashing water as it enters the tub and the spray

arms as they rotate and circulate water. The wash motor often pulsates throughout

the cycle, which varies water pressure and optimizes performance.

NONO

NOTETE

TETE

The dishwasher is programmed to remember your last cycle so you do not have to reset

each time. To start the dishwasher using the same cycle and options selected on the

previous wash, press the START/CANCEL pad.

NONO

NOTETE

TETE

The lights surrounding the pads will only glow when the door is open because the

dishwasher is designed to have the controls hidden under the countertop.

Cycle Selections Option Selections Status Window Start/Cancel