Electrolux Built-In Side-by-side Refrigerators 3/4FULL-WIDTH OVERLAY CUSTOM PANELS

3-1/8" Min. 1/4"
Max.
Required for Optimal
Handle Clearance
3-1/8"
3-1/8"
5/16"
5/16"
A
B
A
B
A
B
2-1/2"
3/4″FULL-WIDTH OVERLAY CUSTOM PANELS
This panel design provides a nearly trimless appearance.
Assemble the spacer panel onto the backer panel. Allow 1/2″clearance on all four sides of the
grille spacer panel. Allow 1/2″clearance on the top and hinge side, 15/16″on the bottom and 3-5/8″
on the handle side of the upper freezer door panel. Allow 15/16″on the top, 1/2″clearance on the
bottom and hinge side and 3-5/8″on the handle side of the lower freezer door panel. Secure the
panels with glue. Be sure to observe clearances on all sides.
Secure the appearance panel to the assembled backer/spacer panel. Use glue
and screws. Countersink screws into the backer panel.
Grille Panel
Lower Freezer Panel
Upper Freezer Panel
Installation Instructions
26
42″Models A B
1/4″Backer Panel 39-15/16″10-3/4″
0.10″Spacer Panel 38-15/16″9-3/4″
3/4″Overlay Panel 40-3/16″11″
42″Models A B
1/4″Backer Panel 16-7/16″35-1/8″
0.10″Spacer Panel 12-5/16″33-11/16″
3/4″Overlay Panel 13-7/16″34-15/16″
42″Models A B
1/4″Backer Panel 16-7/16″17-13/16″
0.10″Spacer Panel 12-5/16″16-3/8″
3/4″Overlay Panel 13-7/16″17-5/8″
3-5/8"
15/16"
1/2"
1/2"
Spacer
Panel
Finished
Backer Panel
3-5/8"
1/2"
15/16"
1/2"
Spacer
Panel
Finished
Backer Panel
Upper Freezer Panel
Spacer Assembly Lower Freezer Panel Spacer Assembly