Electrolux C 718 40 i installation instructions Energy Saving Tips

late in electrical components, which could cause an electrical shock! Hot vapours can lead to the damage of plastic parts.

• The appliance must be dry before it is placed back into service.

Warning!

• Ethereal oils and organic solvents can attack plastic parts, e.g.

–lemon juice or the juice from orange peel,

–butyric acid;

–cleansers which contain acetic acid.

Do not allow such substances to come into contact with appliance parts.

• Do not use any abrasive cleansers.

1.Remove frozen food and the food from the refrigerator. Wrap frozen food in several layers of newspaper. Store it in a cool place, well covered.

2.Switch the appliance off and remove the plug from the mains, or switch off.

3.Clean the appliance and the inte- rior accessories with lukewarm water and with a little bicarbonate of soda added (5ml to 0,5 litre of water). Commercially available dish washing detergents may also be used.

4.Dry the appliance thoroughly.

5.Check the water drain hole on the rear wall of the fridge. Clear a blocked drain hole with the aid of the drain cleaning tool included with the appliance.

6.When everything is dry place the appliance back into service.

Energy Saving Tips

•Do not install the appliance near radiators or other sources of continuous warmth. High ambient temperatures cause longer, more frequent opera- tion of the compressor.

•Ensure sufficient air circulation at the appliance base and at the back wall of the appliance. Never cover air vent openings.

•Do not place warm foods into the appliance. Allow warm foods to cool first.

13