Fitting the Wall Brackets 11 116 12a 650 min

INSTALLING THE COOKER HOOD

Fitting the Wall Brackets

7.2.1

11 116 116

12a

650 min.

Wall marking:

X 1÷2

306

•Draw a vertical line on the supporting wall up to the ceiling, or as high as practical, at the centre of the area in which the hood will be installed.

•Draw a horizontal line at 650 mm above the hob.

•Place bracket 7.2.1 on the wall as shown about 1-2 mm from the ceiling or upper limit aligning the centre (notch) with the vertical reference line.

•Mark the wall at the centres of the holes in the bracket.

•Place bracket 7.2.1 on the wall as shown at X mm below the ﬁ rst bracket (X = height of the upper chimney section supplied), aligning the centre (notch) with the vertical line.

•Mark the wall at the centres of the holes in the bracket.

•Mark a reference point as indicated at 116 mm from the vertical reference line and 306 mm above the horizontal reference line.

•Repeat this operation on the other side.

•Drill ø 8 mm holes at all the centre points marked.

•Insert the wall plugs (not supplied) in the holes.

• Fix the lower bracket 7.2.1 using the two screws (not supplied).

•Fix the upper bracket 7.2.1 and the air outlet connection support 7.3 together using the two screws (not sup- plied).

•Insert the two screws (not supplied) supplied in the hood body ﬁ xing holes, leaving a gap of 5-6 mm between the wall and the head of the screw.

Note: If the hood is to be installed onto a hollow construction or plaster or partition board wall then special ﬁxing screws will be required (not supplied).

CH 710 specifications

The Electrolux CH 710 is a top-tier vacuum cleaner designed to meet the diverse needs of modern households. With its sleek design and advanced technologies, it embodies efficiency and performance. One standout feature of the CH 710 is its powerful suction capability, which ensures that it effectively picks up dust, pet hair, and allergens from a variety of surfaces, including carpets, hardwood floors, and upholstery.

Equipped with cutting-edge Cyclonic Technology, the CH 710 maintains consistent suction power even as the dust container fills up. This innovative approach minimizes clogging while enhancing overall performance. Additionally, its HEPA filtration system captures 99.97% of particles as small as 0.3 microns, making it an ideal choice for allergy sufferers. This feature not only cleans surfaces but also contributes to a healthier indoor air environment.

The design of the Electrolux CH 710 prioritizes user convenience. It boasts a lightweight build that allows for easy maneuverability, making it simple to navigate around furniture and other obstacles. The vacuum also features a 360-degree swivel head, which enhances its ability to clean tricky corners and around furnishings. Moreover, a telescopic handle can be adjusted to fit the user's height, promoting comfortable use.

Another highlight of the CH 710 is its versatile cleaning attachments, including a crevice tool for tight spaces, a dusting brush, and an upholstery nozzle. These accessories enhance its adaptability for various cleaning tasks, ensuring that every corner of the home remains spotless.

The CH 710 also includes a generous cord length, allowing for extended cleaning without constantly switching outlets. For added convenience, it features a dust container that is easy to empty and clean, minimizing contact with dirt and allergens.

In summary, the Electrolux CH 710 is a sophisticated vacuum cleaner that combines powerful suction with a range of user-friendly features. Its advanced technologies, such as Cyclonic Technology and HEPA filtration, ensure a thorough clean while promoting a healthier living environment. With its lightweight design and versatile attachments, it stands out as an excellent choice for anyone looking to maintain a clean and comfortable home.

Electrolux CH 710 manual Fitting the Wall Brackets 11 116 12a 650 min, 306, Wall marking

Models: CH 710