Electrolux Cold Rooms

-10/-21º - 8,4/10 m³

Electrolux cold rooms are available in a vast range of different sizes and functionalities. They are designed to work in tropical temperatures (+43ºC). The range consists of coolers (-2/+8°C) with panels 60 mm in thickness, freezer cold rooms (-10/-21ºC) with panels 100 mm in thickness and with built-in or remote refrigerating unit. The four models detailed on this sheet are freezer cold rooms with a usable volume of 8,4 to 10 cubic meters. Models come with panels and gas pre-charged cooling unit.

CONSTRUCTION

•Very short assembly time. Expert refrigeration knowledge is not required for installation.

•New vacuum injection technology which permits to have significant enhancement on the performances of the panels and high quality.

•Panels are cladded inside and outside with anti-scratch prepainted galvinized steel. Polyurethane foam insulation. CFC and HCFC free.

•Rounded internal and external corners. All edges are radiused.

•Anti-slip walk-in floor.

•The fast-fit centering system allows perfect alignment of the panels. These new fasteners are made of high resistant composite materials and guarantee perfect grip of all components.

•Airtight panels connection. All sides of panels have PVC gasket foamed in place to assure airtight and secure fitting. Any other sealing between panels on site is eliminated.

•The refrigeration unit is mounted on a modular panel for easy installation and quick set-up of the cold room. All the refrigeration units are tropicalized (+43°C) and use R404A refrigerant and are supplied with a high/low temperature alarm.

•If the floor on which the cold rooms will be installed presents irregularities or unevenness up to 1 cm, then the surface of the floor should be levelled.

PERFORMANCES

•Defrosting through heated gas with re-evaporation of defrosting water permits to reduce the total power installed, shorten defrosting time and limit the warming of the cold room.

•All models are equipped with internal lighting (waterproof IP54) mounted on the refrigerating unit panel.

Shelving as accessory

•The control panel includes: luminous ON/OFF switch, internal lighting switch, cold room functioning indicator, defrost cycle indicator, temperature and thermostat control with digital display.

•The right-hinged door is available as standard (left-hinged door on request) and constructed with smooth rounded profiles, cam-lift action hinges, airtight magnetic gasket and high insulation thus allowing to reduce energy and operating costs.

•Newly designed handle complete with lock and interior safety release to prevent entrapment when the door is accidentally locked from outside.

•HACCP monitoring is possible trough a serial port supplied on all models.

•Conform to ruling European safety and hygiene standards and H marked.

Page 1 Page 2
Page 1
Image 1
Electrolux CR28F094S, CR16F094S, CR20F084S, CR20F100S, 102293, 102292 manual 10/-21º 8,4/10 m³, Construction, Performances
Page 1 Page 2

102293, 102311, CR20F084S, CR16F094S, 102292 specifications

The Electrolux CR28F094S, CR20F100S, CR16F094S, and CR20F084S are part of a sophisticated line of air conditioning systems designed to enhance indoor comfort through advanced features and technologies. These units are engineered to provide effective cooling while maximizing energy efficiency, making them suitable for both residential and commercial spaces.

The Electrolux CR28F094S stands out with its powerful 28,000 BTU cooling capacity, making it suitable for larger rooms. Its inverter technology allows for variable speed operation, leading to substantial energy savings while maintaining a consistent temperature. The unit also features a quiet operation mode, ensuring minimal noise during use, which is ideal for homes and workplaces where a peaceful environment is essential.

Moving onto the CR20F100S, this model offers a slightly lower cooling capacity of 20,000 BTU, making it perfect for medium to large rooms. It includes multiple cooling modes, including turbo mode, for rapid cooling when needed. Additionally, it is equipped with an intelligent thermostat that allows users to set their desired temperature, and it adjusts its operation accordingly to maintain comfort levels, further enhancing energy efficiency.

The CR16F094S offers a compact solution with a 16,000 BTU cooling capacity, ideal for smaller spaces. This model integrates a user-friendly digital display and remote control functionality, allowing for easy adjustments from a distance. Its sleep mode function reduces energy consumption during nighttime hours, contributing to lower electricity bills while ensuring a comfortable sleep environment.

Lastly, the CR20F084S is another versatile option, providing 20,000 BTU cooling capacity with advanced filtration systems that reduce indoor allergens. This model comes with smart diagnostics, which helps in identifying any operational issues quickly, ensuring that maintenance is prompt and efficient. Its sleek design and compact size make it an aesthetically pleasing choice that blends well with various interior designs.

In summary, the Electrolux CR series air conditioning units boast robust cooling capacities, energy-saving technologies, and user-friendly features, making them excellent choices for enhancing indoor air quality and comfort across different settings. Each model is designed with specific requirements in mind, ensuring that customers can find the right solution for their cooling needs.
Top Page Image Contents