14Controls & Settings
SYSTEM-MONITORING ALARMS
Indicator Lights
Alarm Reset Button
The electronic control system continuously monitors your refrigerator/freezer for temperature consistency, doors left ajar, and power failures. Variances from normal operating conditions are communicated by audible tones and a set of four status indicator lights.
NOTE
Each time you make settings on the control panel, a single audible tone acknowledges your input.
Responding to Alarms (Audible Tones & Indicator Lights)
Your refrigerator’s control system can convey the following information through audible tones and the alarm indicator lights.
Alarm | Indicator | Audible |
|
|
Name | Light | Tones | Condition | How To Respond |
On | (light is | Alarm system is not active |
| off) | while Freezer and Fresh |
|
| Food compartments are |
|
| cooling toward the current |
|
| temperature settings. |
If Freezer and Fresh Food compartments do not match your temperature settings in three hours, expect the control system to signal other conditions. If cooling does not stabilize toward your current settings, call
Steady
Green
Door Flashing
Ajar Green
High Flashing
Temp Amber
| Alarm system is active. | No response required. |
|
|
|
9 | Freezer or Fresh Food | Close door to disable and reset alarm. |
door has been open for |
| |
| over five minutes. |
|
|
|
|
9 | Freezer or Fresh Food | Press Alarm Reset button to turn off |
compartment has been too | alarm. If temperatures do not improve, | |
| warm (45° F or higher) for | call |
over an hour.
Power | Flashing | A power outage was | Press Alarm Reset button to turn off |
Failure | Amber | detected. | alarm and again to reset. Check if the |
|
|
| power failure lasted long enough to |
|
|
| affect stored food temperatures. |
