Electrolux E36EC75HSS, E30EC65ESS Induction Drop-In Cooktop, Electrolux Major Appliances, N.A

Induction Drop-In Cooktop

E36IC75FSS

13"
max.	36 3/4"
cabinet	1/2"
depth

36 3/4"

211/2"

30" min. for

unprotected cabinet

24" min. for

protected surface

2"

	2 3/4"
	19 7/8"
11/2" min. recommended
distance between rear	4" x 8" opening to route
edge of cutout and	armoured cable
nearest combustible

surface above countertop

20 3/8" min. 25" min. 20 1/2" max.

24"

2 1/2" min. from edge of cutout to front edge of countertop

34	5/8"	18"	1
		min.	7 /2" min. to nearest
			combustible wall
			(either side of unit)
10"		4 1/2"
12"

35 7/8" min.

36" max.

Approximate location of junction box

36" Induction Drop-In Cooktop Specifications

•Product Weight – 56 Lbs.

•Single phase 3- or 4-wire cable, 120/240 or 120/208 Volt, 60 Hertz, fused on both sides of line with ground.

•Connected Load (kW Rating) @ 240/208 Volts = 10.6/9.6kW

•Amps @ 240/208 Volts = 44.2/46.2 Amps

•Recommended Circuit Breaker – 50 Amps

•Always consult local and/or national electric codes.

•Allow 2"space below armored cable opening to clear electrical cable and allow space for installation of junction box on wall at back of cooktop.

•Overhead cabinetry should not exceed a 13" maximum depth.

•Allow 30" minimum clearance between top of cooktop and bottom of unprotected wood or metal overhead cabinetry.

•Absolute minimum horizontal distance between overhead cabinets installed to either side of appliance must be no less than maximum width of appliance.

•Allow 24" minimum clearance when bottom of wood or metal overhead cabinet is protected by not less than 1/8" flame-retardant millboard covered with not less than No. 28 MGS sheet steel, 0.015" stainless steel, 0.024" aluminum or 0.020" copper.

•Allow 1-1/2" minimum clearance between rear edge of cutout and nearest combustible surface above countertop.

•Allow 7-1/2" minimum clearance from edge of cooktop to nearest combustible wall on either side of unit.

•It is recommended that drawers not be used beneath cooktop.

•To reduce risk of fire when using overhead cabinetry, install vent hood that projects horizontally a recommended minimum of 5" beyond bottom of cabinets.

•Induction Drop-In Cooktop model E36IC75FSS is approved to be used over any Electrolux ICON® Single Wall Oven. (Refer to Electric Cooktop Installation Over 30" Electric Single Wall Oven Specifications page on web.)

•Induction Drop-In Cooktop model E36IC75FSS is approved to be used in combination with an Electrolux ICON® 36” Downdraft Vent. (Refer to Drop-In Cooktop / Downdraft Vent Countertop Preparation page on web for detailed installation specifications.)

Note: For planning purposes only. Refer to Product Installation Guide on the web at electroluxicon.com for detailed instructions.

Optional Accessories

•Granite Countertop Installation Kit – (PN# 903061-9010).

•Griddle Plate – (PN# 318251611).

Electrolux Major Appliances, N.A.

USA • 250 Bobby Jones Expressway • Augusta, GA 30907 • 1-877-4electrolux (1-877-435-3287) • electroluxicon.com	High standards of quality at Electrolux Home Products, Inc. mean we are
CANADA • 5855 Terry Fox Way • Mississauga, ON L5V 3E4 • 1-800-265-8352 • electroluxicon.ca	constantly working to improve our products. We reserve the right to change
	specifications or discontinue models without notice.

E36IC75FSS 01/09 © 2009 Electrolux Home Products, Inc. Printed in the U.S.A.