Electrolux E30MO75HPS finished anti-tip bracket installation, removing oven for servicing

MICROWAVE WALL OVEN INSTALLATION INSTRUCTIONS

Microwave Wall Oven Installation

Two persons are required to install the oven. Never

hold the door handle when moving the oven.

anti-tip bracket installation

Cutout Width

(See dimensions below)

3.Place the oven adjacent to the opening on a table or stand. Plug the power supply cord into the electrical outlet. Carefully guide the oven into the prepared opening. Avoid pinching cord between oven and wall. See Figure 4. Push the unit in and against the cabinet. The oven side bracket will clip into the Anti-Tip brackets. See Figure 3.

4.To pull out the oven for servicing, open the door and locate the two holes on the side frame. Simultaneously insert the tools provided with the appliance in both holes and pull the oven towards you. See Figure 5.

Anti-Tip Brackets

Cutout Height

21" (53.3 cm) Min.*

16-1/2"21-1/2" (54.6 cm) Max.* (41.9 cm)

27-INCH MICROWAVE Cutout Width	30-INCH MICROWAVE Cutout Width
25-1/8" (63.8 cm) Min.*	27-5/8" (70.2 cm) Min.*
25-5/8" (65.1 cm) Max.*	28-1/8" (71.4 cm) Max.*
25-3/8" (64.5 cm) Recommended*	27-7/8" (70.8 cm) Recommended*
30-INCH CONVECTION Cutout Width
28-1/2" (72.4 cm) Min.*
29" (73.7 cm) Max.*	Figure 3
28-3/4" (73.0 cm) Recommended*

finished anti-tip bracket installation removing oven for servicing

Anti-Tip Bracket
installed in cabinet	Oven removed
	from the cabinet

Oven

Bracket

Cabinet

Anti-Tip

OvenBracket

released

Right Side

Tool supplied

Figure 4 Figure 5

E3