Electrolux E30MO75HSS specifications Built-In Microwave With Drop-Down Door

Built-In Microwave With Drop-Down Door

E30MO75HPS professional series

22"

Allow at least 15" clearance for door depth when open

*Note: When used in combination with
another Electrolux ICON ® built-in product, a
minimum clearance of 2 1/8" required from
bottom of Built-In Microwave cutout to top
edge of companion product’s faceplate,	2"
leaving a 2" visible gap between both
product faceplates.	min.

30"

23 1/2"

28"21" min.

		21 1/2"
20 3/4"		max.
	Power	2"
	supply	(visible
	location	gap)*
	(left
	bottom
	rear)	36" min.
21 11/16"		required
Bottom Duct Assembly		distance
		to floor

30 1/8"	24"
min.	min.

28 1/2" min. 29" max.

20 1/8" min.

Full plywood base required to support 150 lbs.

120V/60Hz	Outlet should NOT
	be located within
grounded outlet	shaded area
Bottom Duct Assembly	C
	L
4"	6"
21"
min.
21 1/2"	18"
max.

28 1/2" min.	20 1/8" min.
29" max.

30" Built-In Microwave With Drop-Down Door Specifications

•Product Weight – 84 Lbs.

•Voltage Rating – 120V/60Hz/15 Amps

•Connected Load (kW Rating) @120 Volts = 1.6kW

(For use on adequately wired 120V, dedicated circuit having 2-wire service with a separate ground wire. Appliance must be grounded for safe operation.)

•Amps @120 Volts =13.7 Amps

•Always consult local and/or national electric codes.

•Allow at least 15" clearance for oven door depth when open.

•Minimum required distance from floor is 36".

•Minimum 20-1/8" deep oven cutout dimension is critical for proper installation for oven and faceplate to fit flush against cabinet front.

•Full oven base of solid plywood or similar material required, capable of supporting 150 Lbs.

•Base must be level and cabinet front must be square.

•Grounded outlet should NOT be located in shaded area, as indicated.

•Built-In Microwave is NOT approved to be used under counter.

•Built-In Microwave can be built in alone or is approved to be used in combination with any Electrolux ICON® Electric Single Wall Oven and/or Warmer Drawer. (Refer to model-specific Combination Installation Specification pages on web.)

•When used in combination with another Electrolux ICON® built-in product, a minimum clearance of 2-1/8" required from bottom of Built-In Microwave cutout to top edge of companion product’s faceplate, leaving a 2" visible gap between both product faceplates.

Note: For planning purposes only. Refer to Product Installation Guide on the web at electroluxicon.com for detailed instructions.

Electrolux Major Appliances, N.A.

USA • 250 Bobby Jones Expressway • Augusta, GA 30907 • 1-877-4electrolux (1-877-435-3287) • electroluxicon.com

High standards of quality at Electrolux Home Products, Inc. mean we are

CANADA • 5855 Terry Fox Way • Mississauga, ON L5V 3E4 • 1-800-265-8352• electroluxicon.caconstantly working to improve our products. We reserve the right to change specifications or discontinue models without notice.

E30MO75HPS 03/09 © 2009 Electrolux Home Products, Inc. Printed in the U.S.A.