Electrolux E30SO75FPS, E30SO75ESS Combination Installation, High-Speed Oven/Single Wall Oven

30" Combination Installation –

High-Speed Oven/Single Wall Oven

For detailed product dimensions and installation specifications, refer to model-specific product page and installation guide on web

24" min.	30" min.	240V/60 Hz
		grounded electrical
		outlet should NOT
		be located within
	20 1/4"	shaded area

30" High-Speed Oven Cutout

For models:

E30SO75FPS

E30SO75ESS

30" Electric Single Wall Oven Cutout

For models:

E30EW75GPS

E30EW75GSS

*Minimum 2 5/8" clearance required from bottom of Built-In High-Speed Oven cutout to top edge of Wall Oven’s faceplate, leaving a 2" visible gap between both product faceplates

**Critical dimension – MUST be applied

21 11/16" min.

223/16" max.

2"

(visible

gap)*

28 1/2" min.

28 7/8" max.

31"

suggested

distance

4 1/2"

min.

required

		Full plywood base
		required to support
22 3/8" min.	16 3/4"	150 lbs.
22 7/8" max.	C
	L
		4"x 4" opening
		to route armoured
28 1/2" min.	24" min.**	cable
	(critical
29" max.	dimension)
		Full base required
		to support 200 lbs.
		3" max.
	2" min.	Electrical junction
	Bottom cutout	box location
	edge must be
	finish cut

30" Combination Installation Specifications

•Always consult local and/or national electric codes.

(Refer to product-specific electrical specifications on this page.)

•Minimum 24"deep cutout dimension is critical for proper combination installation, to ensure that each built-in product’s faceplate will fit flush against cabinet front.

•Bases must be level and cabinet front must be square.

•Minimum 4-1/2"required distance from bottom of Wall Oven cutout to floor, 31"suggested.

•Respect critical dimensions as noted for proper installation of built-In products.

•Minimum 23-1/4" clearance needed for Wall Oven door depth when open.

30" High-Speed Ovens Specifications

•Product Weight – (E30SO75FPS/E30SO75ESS) 115 Lbs.

•Voltage Rating – 240V/60 Hz/15 or 20 Amps

•Single phase 3- or 4-wire cable, 240 Volt, 60 Hertz AC only electrical supply with ground required on separate circuit fused on both sides of line.

•Connected Load (kW Rating) @ 240 Volts = 3.3kW

•Amps @ 240 Volts =13.2 Amps

•Full base of solid plywood or similar material required, capable of supporting 150 Lbs.

•Minimum 2-5/8"clearance required from bottom of High-Speed Oven cutout to top edge of Wall Oven’s faceplate, leaving a 2"visible gap between both product faceplates.

30" Electric Single Wall Ovens Specifications

•Product Weights – (E30EW75GPS) 178 Lbs. / (E30EW75GSS) 175 Lbs.

•Single phase 3- or 4-wire cable, 120/240 or 120/208 Volt, 60 Hertz AC only electrical supply with ground required on separate circuit fused on both sides of line.

•Connected Load (kW Rating) @ 240/208 Volts = 4.0/3.0kW

•Amps @ 240/208 Volts =16.6/14.4 Amps

•Full oven base of solid plywood or similar material required, capable of supporting 200 Lbs.

Note: For planning purposes only. Refer to Product Installation Guide on the web at electroluxicon.com for detailed instructions.

Electrolux Major Appliances, N.A.

USA • 250 Bobby Jones Expressway • Augusta, GA 30907 • 1-877-4electrolux (1-877-435-3287) • electroluxicon.com	High standards of quality at Electrolux Home Products, Inc. mean we are
CANADA • 5855 Terry Fox Way • Mississauga, ON L5V 3E4 • 1-800-265-8352 • electroluxicon.ca	constantly working to improve our products. We reserve the right to change
	specifications or discontinue models without notice.

SO_EW INST 08/08 © 2008 Electrolux Home Products, Inc. Printed in the U.S.A.