Electrolux E36GC75GSS specifications Gas Slide-In Cooktop, 3/8 7 1/4

Gas Slide-In Cooktop

E36GC75GSS

36" min.

13"			35 7/8"
max.	2"
cabinet
depth
Optional 9" stainless
steel backsplash
1" min. recommended		Side inset 3/8"
distance between rear
edge of cutout and
nearest combustible		3"
surface above countertop			2"
		2" dia.	2 1/2"
		opening to route
		power cable
25" min. 22"
		1 1/8"
24"		max.
			4" x 4" opening to
			route gas supply

30" min. for

unprotected cabinet

24" min. for

protected surface

25 3/4"

18" min.

7 3/4"

7" min. to nearest combustible wall (either side of unit)

7 1/2"

3/8"

7 1/4"

35 3/16" * 35 3/16"*35 15/16"

*Both cutout dimensions are critical to proper cooktop installation. Due to variations in countertop materials it is recommended to undercut finished dimension (35-15/16") and adjust upon installation of cooktop.

36" Gas Slide-In Cooktop Specifications

•Product Weight – 113 Lbs.

•Voltage Rating – 120V/1.2W/60 Hz/15 Amp

•Connected Load (kW Rating) @120 Volts = 0.001kW (For use on adequately wired 120V, dedicated circuit having 2-wire service with a separate ground wire. Appliance must be grounded for safe operation.)

•Amps @120 Volts = 0.008 Amps

•Always consult local and/or national electric and gas codes.

•Cooktop ships with 3/4" factory regulator.

•Lp conversion kit supplied.

•Respect critical dimensions as noted for proper installation of cooktop.

•Overhead cabinetry should not exceed a 13" maximum depth.

•Allow 30" minimum clearance between top of cooktop and bottom of unprotected wood or metal overhead cabinetry.

•Absolute minimum horizontal distance between overhead cabinets installed to either side of appliance must be no less than maximum width of appliance.

•Allow 24" minimum clearance when bottom of wood or metal overhead cabinet is protected by not less than 1/8" flame-retardant millboard covered with not less than No. 28 MGS sheet steel, 0.015" stainless steel, 0.024" aluminum or 0.020" copper.

•Allow 1" minimum clearance between rear edge of cutout and nearest combustible surface above countertop.

•Allow 7" minimum clearance from edge of cooktop to nearest combustible wall on either side of unit.

•It is recommended that drawers not be used beneath cooktop.

•To reduce risk of fire when using overhead cabinetry, install vent hood that projects horizontally a recommended minimum of 7" beyond bottom of cabinets.

•Gas Slide-In Cooktop model E36GC75GSS is NOT approved to be used over any Electrolux ICON™ Single Wall Oven.

•Gas Slide-In Cooktop model E36GC75GSS (without optional backsplash) is approved to be used in combination with an Electrolux ICON™ Downdraft Vent. (Refer to Slide-In Cooktop /Downdraft Vent Countertop Preparation Specifications page and on web.) Proper combination installation will require cooktop power cord to be relocated to underside of unit. (For details, refer to 30" & 36" Gas Slide-In Cooktop Power Cord Relocation Instructions on web.)

Note: For planning purposes only. Refer to Product Installation Guide on the web at electroluxicon.com for detailed instructions.

Optional Accessories

•When replacing an existing cooktop with countertop cutout deeper

than 7-1/4" and less than 8-1/2", order free Depth Adjustment Filler Kit – (903051-9010).

•9" Stainless Steel Backsplash – (903048-9010).

•Black Knobs Kit – (903049-9120).

USA • 250 Bobby Jones Expressway • Augusta, GA 30907 • 1-877-4electrolux (1-877-435-3287) • electroluxicon.com	High standards of quality at Electrolux Home Products, Inc. mean we are
	constantly working to improve our products. We reserve the right to change
CANADA • 5855 Terry Fox Way • Mississauga, ON L5V 3E4 • 1-800-265-8352 • electroluxicon.ca
	specifications or discontinue models without notice.

E36GC75GSS 05/08 © 2008 Electrolux Home Products, Inc. Printed in the U.S.A.