electrolux cold 13
1.Fill the ice cube maker until the cubes
will be full in the horizontal position or by
the load line mark in the vertical
position. After this close the ice cube
maker with cap.
2.Place the holder in the lid of the freez-
er and leave to solidify
3.To loosen the frozen cubes, either
bend the ice cube tray or hold it under
running water for a few seconds.
Important! Never try to free an ice tray
that is frozen to the freezer
compartment using pointed or sharp
edged objects. Use a soft plastic
scraper.
Replacement of electric bulbs
Warning! Risk of electric shock! Prior to
replacement of electric bulbs, remove
the plug from the mains socket or discon-
nect the fuse.
1.Turn the temperature control knob
counterclockwise to "off" position.
2.Remove mains plug
3.For replacement of the bulb press the
cover hook and remove as shown in
the illustration
4.Replace defective light bulb.
5.Replace the cover again.
Packaging and positioning
Food must be cold before freezing
(no more than room temperature)
Food must be packed in airtight and
moisture -proof packaging to prevent it
from drying out.
Place fresh food for freezing in the
quick freeze basket making sure that it
is not in contact with frozen food
already in the freezer.
Never fill the freezer to more than
loading line (arrow with
dashed line) shown on
the illustration.
See under "Helpful
hints".
Capacity
The freezing capacity of the freezer is
stated in the rating plate (kg/24 hours). Do
not exceed the amount stated - if you do,
the freezing capacity time will be extended.
The rating plate is located on the back of
the cabinet.
Lamp specification: 220 to 240 V, max
15W bulb holder: E14
For the removal of the lampshade you have to
push the hook by a screwdriver first, and than you can
turn it out
Lamp
←
Load Line
Fyldningsniveau
Fyllingsniva
Niveau de de remplissage
Füllhöhe