12electrolux
If the programme has been interrupted as a result of the water reservoir being full: Press the START/PAUZE (Start/Pause) button to continue the drying cycle.
The water reservoir has a volume of ap- prox. 4,5 litres. This is sufficient for around 8 kg of laundry which has previ- ously been spun at 1000 revolutions / minute.
The condensed water can be used as distilled water, e.g. for steam ironing. However it must first be filtered (e.g. with a coffee filter) to remove any residue and small pieces of fluff.
Cleaning heat exchanger
If the 
HEAT EXCHANGER is displayed, the heat exchanger needs to be cleaned.
Caution! Operating when the heat exchanger is blocked with fluff can damage the dryer. This also increases energy consumption.
1.Open door.
2.Open door in plinth. To do this, press the release button on the bottom of the door aperture and open the door in the plinth to the left.
3.Clean fluff from the inside of the door and the heat exchanger front chamber. Wipe the door seal with a damp cloth.
4.Turn both lock washers inwards.
5.Use the handle to pull the heat exchanger out of the base and carry it horizontally to prevent any remaining water from spilling.
6.To empty the heat exchanger, hold verti- cally over a
Caution! Do not use sharp objects to clean. The heat exchanger could develop leaks.
7.Clean heat exchanger.
It is best to use a brush or to rinse thor- oughly with a
