Use
The control panel
ENGLISH
1 | 2 3 |
1 Programme chart
This will help you to select the correct programme for drying.
2 Mains-ON light
Comes on when the appliance is switched on (ON/OFF button pressed down) and goes out when this button is released.
3 ON/OFF button 
This button is used to switch the dryer on. At the end of the programme, release this button by pressing it again to switch the dryer off.
4 Low temperature button 
Pressing this button allows drying to be performed at a lower temperature, for delicate items.
The corresponding pilot light comes on.
5 Buzzer OFF button 
A buzzer sounds during the
4 5 | 6 | 7 | 8 |
6 Start button 
Press this button for about 2 seconds to start the dryer after having selected the programme.
If the door is opened while the programme is running, this button must be pressed again after closing the door in order to restart the programme from the point at which it was interrupted.
This button must also be pressed after a power cut.
In both cases light 
or 
(depending on the phase in progress)
flashes to remind you that the start button needs to be pressed again.
7 Programme phase indicator lights
These lights indicate the various phases of the programme as they are being performed.
“Drying” light 
This light indicates that the appliance is in the drying phase.
“Cooling” light 
This light indicates that the appliance is in the cooling phase. At the end of drying, there is a 10 minute cooling phase to cool the laundry.
If light 
or 
is flashing, this means that the Start button needs to be pressed again for the programme to resume.
“End of programme” light 
This light flashes at the end of the cooling phase and during the
9
