20
EN
Before using for the first time
Before using the appliance for the first time you
should clean the interior and the exterior,
following the cleaning instructions given in the
section “Cleaning and Maintenance”.
Then heat the crockery warmer for at least 2
hours. For this, turn the temperature control to the
maximum position (see section ‘Selecting
temperature”).
Make sure the kitchen is well-ventilated when you
are doing this.
The appliance’s parts are protected by a special
product. For this reason, during the first heating
an odour will be released. Both the odour and any
smoke that may form will disappear after a short
time and neither signifies that there is anything
wrong with the connection or the appliance.
Control Panel
The control panel has a function and the on/off
switch. The control panel is only visible when the
drawer is open.
Using the crockery warmer
To use the crockery warmer, proceed as follows:
• Put the crockery in the drawer.
• Select the function you want by turning the
thermostat control to the desired position.
• Switch on the appliance by pressing the switch,
which will light up.
• Close the drawer.
Be careful not to use too much force when closing
the drawer since it may open up again.
Before taking out the warm crockery you must
switch off the crockery warmer by pressing the
switch again.
Selecting function
By turning the thermostat control you can select
temperatures between 30 and 85 °C.
Do not force the thermostat control to the left
of the “0” position or to the right of the
maximum position since this may damage the
appliance.
As soon as the temperature selected is reached,
the heating is turned off. When the temperature
drops to a value below that selected, the heating
is turned back on.
The temperature scale is not marked with
absolute temperatures in ºC but instead has
symbols which correspond to the optimum
temperatures for groups of crockery:
Symbol ºC Function
30 Defrosting
40 Proving dough
Cups / glasses warming
60 Crockery warming
80 Food warming