The grease filter has saturation indicators, which are small squares made from a series of dots. When the white paper inside the squares becomes saturated with grease the coloured dots start to run and spread across the paper, indicating that the filter has reached saturation point and must be replaced.
The synthetic grease filter cannot be cleaned.
It cannot be washed.
To Replace the Synthetic Grease Filter1.Remove the lower grille.
2.Push the wire retaining clips to the side and remove.
3.Clean the metal grille and clips before replacing the paper grease filter.
The clips have sharp points, handle with care and keep away from children.
This appliance is a possible fire hazard if the grease and charcoal filters are not replaced as recommended.
Changing the Light BulbThe bulb should be replaced with a
Replacement filters, and light bulbs can be obtained from your local Service Force Centre.
7