Description of the appliance
1.Motor speed switch
2.Light switch
3.Extractible drawer
4.Suction grid with grease filter
5.Hob light
Standard accessories included:
●Template for mounting under cupboard
●Screws:
● Duct with no return valve | 3 |
ON |
2 |
1 |
OFF |
Function
The hood may be used as follows:
-For air exhausting
-For air recycling
Exhausting
The air is vented outside by means of a Ø 120 mm pipes to be connected to the coupling ring B with no return valve (Fig.2).
Attention! In the horizontal runs the duct must be slightly slanted (about 10°) and directed upwards to vent the air easily from the room to the outside.
The hood cannot be connected to flues of other appliances that run on energy
sources other than electricity. Please, keep to the provisions of official directives regarding the question of fumes discharge.
4 
5 5
Fig. 1
B
Fig. 2
Recycling
The air is filtered through a carbon filter and recirculated into the room. The filtered air is discharged by means of a Ø120 mm pipe which goes through the cupboard and whose outlet is above the cupboard.
This version is used when there is no exhaust duct for venting outdoors or when it is impossible to install one.
4
