Manuals / Electrolux / Kitchen Appliance / Ventilation Hood

Electrolux EFT60002, EFT60003, EFT60001 user manual Installation

Models: EFT60001 EFT60002 EFT60003

1 12
Download 12 pages 3.74 Kb
Page 7
Image 7

INSTALLATION

2 - INSTALLATION INSTRUCTIONS

Some installation systems require the opening and removal of the metal grille panel.

2.1- Instructions for opening and removing the metal grille panel

To open the grille panel, press inwardly on the two slider catches at each side of the grille panel and the grille will pivot down.

To remove the metal grille, pull forward on the right hand side so that the hin- ge pin on the back of the grille will be released from the slot in the side of the casing.

2.2- Wall cabinet fixing

a-Predrilled wall cabinet: fix the hood

onto the wall cabinet base panel using the four screws 4.2 x 45 mm (supplied

with the fixing kit).

It is not necessary to open the metal grille.

b-No predrilled wall cabinet:

b.1-If the hood is provided with a pa-

per fixing template, follow the instruc-

tions.

b.2-If the hood is not provided with

a paper fixing template, position the

hood on the wall cabinet base panel and pilot drill the 3.5 x 16 mm screws

(not supplied with the fixing kit) from

the inside onto the wood.

2.3 - Wall mounting

a-Drill two Ø 8 mm holes on the wall us- ing the paper template, insert two rawl plugs and two 4.2 x 44,4mm screws leaving 5 mm untightened. Open the metal grille panel, hook the hood on and fully tighten the screws.

b-If the hood is not provided with a pa-

per fixing template, drill two Ø 8mm

holes (see draw.), insert the plugs and screws, proceeding as directed under

Installation electrolux

 

paragraph a.

 

c-For wall mounting using wallbrackets

 

(optional), follow the instructions of

 

the fixing template.

 

d-Pay attention to the safety regulation

 

of point 1.6.

EN

2.4- Choice of operating mode a - Evacuation mode

To check that the hood is set up for evacuation, open the grille panel and make sure that the conversion lever or the change-over knob on the centrifugal unit is in the DUCTING position. The charcoal filter is not required.

For ducting to the outside, the hood is supplied with a rear and top outlet. A flange spigot of 100 mm diameter (120 mm in certain models) is usually fitted on the top outlet and a blanking plug on the rear outlet. If you choose to duct the hood from the rear of the casing, you should invert the position of the flange and of the blanking plug. Pay attention to the safety regulation 1.1.

b - Internal recirculation mode

To check that the hood is set up for recycling, open the grille panel and make sure that the conversion lever or the change-over knob on the centrifugal unit is in the RECYCLING position. The charcoal filter is to be fitted. To fit the charcoal filter, support the filter with one hand and turn the thumb screw through the centre of the charcoal filter. If the filter is of the interlocking type, turn the filter clockwise. The hood can remain connected to the outside.

2.5- Electrical connection and working test

1-The safety measures 1.2, 1.3, 1.4 and

1.5of paragraph 1 are to be strictly observed.

2-Once the electrical connection has been completed, check that the worktop illumination, motor and speeds work properly.

Page 6 Page 8
Page 7
Image 7
Electrolux EFT60002, EFT60003, EFT60001 user manual Installation
Page 6 Page 8

EFT60001, EFT60002, EFT60003 specifications

Electrolux, a leading manufacturer in home appliances, has made significant strides in kitchen ventilation technology with its models EFT60003, EFT60002, and EFT60001. These range hoods not only enhance the aesthetics of your kitchen but are engineered with advanced features that cater to both functionality and style.

The Electrolux EFT60003 is a powerful extraction unit designed for performance. Equipped with a high-efficiency motor, it maintains excellent ventilation while minimizing noise levels. This model features three speeds, allowing users to adjust the suction power depending on the cooking task at hand. The inclusion of dishwasher-safe aluminum grease filters ensures easy maintenance, enhancing durability and ensuring a clean kitchen environment. A built-in LED light brightens up your cooking area, providing visibility while you work.

Next in the lineup, the EFT60002 offers similar attributes but with a slightly more compact design suited for smaller kitchens. It maintains the three-speed setting, ensuring versatile operation. The EFT60002 also incorporates a quiet operation mode, making it an ideal choice for those who value a peaceful cooking experience. Its elegant design complements any modern kitchen while ensuring that the powerful extraction capabilities effectively eliminate smoke, odours, and steam.

Lastly, the EFT60001 rounds out this trio of kitchen essentials with its sleek appearance and reliable performance. Like its counterparts, it features three adjustable speeds, providing flexibility based on cooking needs. The model prioritizes energy efficiency, contributing to decreased electricity consumption while maintaining outstanding airflow performance. The EFT60001 also includes a simple control interface, making it user-friendly even for those less technologically inclined.

All three models are designed for easy installation and can fit a variety of kitchen layouts. They operate using a recirculating system, which is perfect for homes where ducting might not be feasible. With a combination of style, performance, and practicality, Electrolux's EFT60003, EFT60002, and EFT60001 stand out as excellent choices for anyone looking to upgrade their kitchen ventilation, ensuring that cooking is a more pleasant and efficient experience. These models reflect Electrolux's commitment to innovation and quality, making them valuable assets for any culinary space.