Over-the-Range Microwaves
EI30BM55H S, EI30BM55H W, EI30BM55H B, EI30BM55H Z
Locate 120V/60Hz grounded outlet inside upper cabinet
Microwave MUST be mounted to BOTH a top cabinet AND a wall*
15 1/2"
12"
Rear Wall 30" min.
Bottom edge of cabinet MUST be 30" min. from cooking surface
Cabinet MUST
min.
66" min. from floor
30" min.
min. 14"
max.
be capable of supporting a total load of 110 lbs.
to top of
microwave
2" min.
Backsplash
Overall depth at center of arc including rear extrusion – 16 7/8"
Blower plate allows for vertical | C | Power cord |
or horizontal ducting | L | location |
| ||
|
|
16 1/2"
17 1/16"
*Can NOT be installed in island or peninsula cabinet arrangements
rear |
|
extrusion |
|
29 15/16" | lower |
15 3/4" | extrusion |
Allow at least 26" clearance for door depth when open
30" Over-the-Range Microwave Specifications
•Product Weight – 61 Lbs.
•Voltage Rating – 120V/60Hz/15 Amps
•Connected Load (kW Rating) @120 Volts = 1.71kW
(For use on adequately wired 120V, dedicated circuit having
•Amps @120 Volts =14.3 Amps
•Always consult local and/or national electric codes.
•Grounded outlet should be located in cabinet above, with hole in base to route power cord. Carefully follow top template instructions for power cord clearance when installing beneath smooth, flat cabinets.
•Microwave’s ventilation system is convertible, designed for two types of exhaust – outside, using either vertical or horizontal ducting; or recirculating, requiring no ducting.
•For safe and proper installation, microwave MUST be mounted to
BOTH a top cabinet AND a wall, and connected to at least one wall stud. Can NOT be installed in island or peninsula cabinet arrangements.
•Cabinet bottom MUST be level to insure proper installation.
•Cabinet MUST be capable of supporting a total load of 110 lbs.
•Filler blocks recommended for installation when cabinet front hangs below recessed bottom shelf.
•Minimum distance of 30" required from cooking surface to bottom edge of top cabinet.
•Minimum distance of 66" required from floor to top of microwave.
•Opening between cabinets MUST be 30" wide and free of obstructions. For openings up to 36" wide, order optional 36" Filler Panel Kit to fill in gap between unit and cabinets.
•Allow 26" minimum clearance for 90° door swing.
Ducted Option Specifications
•For outside ventilation only.
•Exhaust duct adapter will be needed for outside ventilation, to mate with standard
•For most efficient airflow exhaust, use a straight run or as few elbows as possible with a maximum duct length of
•For horizontal installation, be sure to allow enough space between wall studs to accommodate exhaust.
•Refer to web for detailed duct preparation instructions.
Ductless (Recirculated) Option Specifications
•If ducting to outside is not an option, ventilation system can be converted to ductless to recirculate air inside.
•Refer to web for detailed convertible ventilation installation instructions.
Note: For planning purposes only. Refer to Product Installation Guide on the web at electroluxappliances.com for detailed instructions.
Optional Accessories
•36" Filler Panel Kit: S – (PN# MWFILKTSS), W – (PN# MWFILKTWH), B – (PN# MWFILKTBLK).
Electrolux Major Appliances, N.A.
USA • 250 Bobby Jones Expressway • Augusta, GA 30907 • | High standards of quality at Electrolux Home Products, Inc. mean |
CANADA • 5855 Terry Fox Way • Mississauga, ON L5V 3E4 • | we are constantly working to improve our products. We reserve the right |
to change specifications or discontinue models without notice. |
EI30BM55H 11/08 | © 2008 Electrolux Home Products, Inc. | Printed in the U.S.A. |
