External components:
7.Dispenser
8.Water Lever
9.Water drop tray
INITIAL OPERATIONS TO USE YOUR WATER DISPENSER
1.Remove every tape and other protection system from the tank assembly;
2.Clean the components as described
into the WATER DISPENSER CLEANING PROCEDURE chapter in order to remove eventual residues;
WATER DISPENSER CLEANING PROCEDURE
1.Unblock the two stopping elements on the sides of the tank as shown in the pictures;
-Take out the BRITA MAXTRA cartridge from the water filter unit
-Press the stopping elements in the middle and move it up.
-Move the stopper into direction of the central tank
GB electrolux 15
2.Push up the tank along the direction of the Valve
3.Remove the lid and the funnel
4.Unscrew the valve in counter clockwise (pay particular attention to lose the Valve Gasket because is necessary to a correct functioning of the features);
5.Clean the tank lid, the valve and the gasket with a solution of warm water and neutral soap. Rinse it and put it inside the door hole during the cleaning of the other components (in order to avoid cold air leakage from the fridge);
6.Clean the tank and funnel into the dishwasher or with a solution of warm water and neutral soap and rinse them;
7.After the tank components cleaning take back the valve from the fridge door and assembly the tank in the inverse order (4;3;2;1) of disassembly (pay
attention at the valve gasket positioning);
8.Put the tank assembled on the door along the valve direction;
9.Block the stopping elements in the inverse order of unblock;
