External components:
7.Dispenser
8.Water Lever
9.Water drop tray
INITIAL OPERATIONS TO USE YOUR WATER DISPENSER
1.Remove every tape and other protection system from the tank assembly;
2.Clean the components as described in the WATER DISPENSER CLEANING PROCEDURE section in order to remove eventual residues;
WATER DISPENSER CLEANING PROCEDURE
1.Unblock the two stopping elements on the sides of the tank as shown in the pictures;
-Take out the BRITA MAXTRA cartridge from the water filter unit
-Press the retainer in the middle and move it up.
-Move the retainer into direction of the central tank
GB electrolux 15
2.Push up the tank along the direction of the Valve
3.Remove the lid and the funnel
4.Unscrew the valve in a counter clockwise direction (pay particular attention not to lose the Valve Gasket).
5.Clean the tank lid, the valve and the gasket with a solution of warm water and neutral soap. Rinse it and put it inside the door hole during the cleaning of the other components (in order to avoid cold air leakage from the fridge);
6.Clean the tank and funnel in the dishwasher or with a solution of warm water and neutral soap and rinse them;
7.After cleaning the tank components remove the valve from the fridge door and assemble the tank in the reverse order (4;3;2;1) of disassembly (pay attention to the positioning of the valve gasket)
8.Put the assembled tank on the door along the valve direction;
9.Replace the retainers in the reverse order of removal;
