Electrolux ENB 39405 W, ENB 40405 S, ENB 35405 W, ENB 40405 W Important Safety Instructions

Models: ENB 35405 W ENB 40405 S ENB 40405 W ENB 39405 W

1 40
Download 40 pages 13.84 Kb
Page 5
Image 5
IMPORTANT SAFETY INSTRUCTIONS

GB electrolux 5

IMPORTANT SAFETY INSTRUCTIONS

These warnings are provided in the interests of your safety. Ensure that you understand them all before installing or using this appliance. Your safety is of paramount importance. If you are unsure about any of the meanings or these warnings contact the Customer Care Department.

Prior to installation

Check the appliance for transport damage. Under no circumstances should a damaged appliance be installed. In the event of damage please contact your retailer.

Installation

This appliance is heavy. Care should be taken when moving it.

It is dangerous to alter the specifications or attempt to modify this product in any way.

Ensure that the appliance does not stand on the electrical supply cable. If the supply cable is damaged, it must be replaced by a cable available from your local Service Force Centre.

Make sure that the power plug has not been squashed or damaged during transit.

- A damaged power plug may overheat and cause a fire.

As you unpack the appliance, check carefully for any signs of transit damage.

Do not place heavy articles or the fridge/freezer itself on the power cord.

-There is a risk of a short circuit and fire.

Do not remove the power cord by pulling on its lead, particularly when the fridge/freezer is being pulled out of its niche.

-Damage to the cord may cause a short-circuit, fire and/or electric shock.

-If the power cord is damaged, it must be replaced by a certified

service agent or qualified service personnel.

If the power plug socket is loose, do not insert the power plug.

-There is a risk of electric shock or fire.

Any electrical work required to install this appliance should be carried out by a qualified electrician or competent person.

Parts which heat up should not be exposed. Whenever possible, the back of the appliance should be close to a wall, but leaving the required distance for ventilation, as stated in the installation instructions. The appliance should be left for 2 hours after installation before it is turned on, in order to allow the refrigerant to settle.

Child Safety

Do not allow children to tamper with the controls or play with the product. Keep packaging materials away from children, to prevent the risk of suffocation!

This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.

Children should be supervised to ensure that they do not play with the appliance.

Page 5
Image 5
Electrolux ENB 39405 W, ENB 40405 S, ENB 35405 W, ENB 40405 W user manual Important Safety Instructions