OPERATION
Before using
Remove all securing tapes. Wash inside the appliance with lukewarm water and bicarbonate of soda (5 ml to 0.5 litre of water).
Do not use soap or detergent as the smell may linger. Dry thoroughly.
Control panel
1
6
5
A - Pilot light - Green
B - Thermostat control knob
C - Fast freeze light - Amber
D - Fast freeze switch
4
2
3
Control Panel
A. Pilot light
The operation light is illuminated continuously, to show that the appliance is on.
B. Thermostat control knob
Turn the thermostat control knob clockwise to required setting.
C. Fast freeze light
The fast freeze light is illuminated, to show that the fast freeze function is working.
D. Fast freeze control switch
When you place fresh food in the appliance, press the fast freeze control switch.
Start your appliance
Allow the appliance to stand for 2 hours after installation.
Insert the plug into the wall socket. The pilot light (A) will illuminate to show that the appliance is on.
Turn the thermostat control (B) to a midway setting. Leave the appliance for approximately 4 hours for the correct temperature to be reached before placing food inside.
To switch off the appliance turn the thermostat control to position “O” .
Temperature control
The temperature within the freezer is controlled by the thermostat situated in the middle of the appliance.
To operate the freezer proceed as follows:
Position 1 = minimum coldness
Position 6 = maximum coldness
Turn the thermostat control knob beyond the «O» position.
When you first start the
However, if the appliance is working in unfavourable room conditions such as
-poor ventilation,
-high temperature,
-frequent door openings,
it may be necessary to select a more suitable setting.
4