17
Press in the joint covers between the appliance and
the kitchen furniture.
Apply covers (B) on joint cover lugs and hinge holes.
Position the runners (H) at the top and bottom of the
inside of the kitchen unit as shown in the figure and
mark the position of the external holes.
After preparing the holes, screw the runners to the
kitchen unit door using 3,5x16 mm screws.
Open both the appliance door and that of the kitchen
unit to approx. 90°.
Place the little plates over the runners. Hold the doors
of the appliance and the unit together and mark the
holes.
Remove the little plates and drill the holes 2 mm in
diameter. Replace the little plates over the runners
and screw in the screws provided (3,5x16 mm). For
the alignement of the kitchen unit door, if necessary,
use the clearance size of the slotted holes. At the end
of the procedure, check that the doors of the appliance
and the kitchen unit open properly.
PR35
8mm
PR34
D094
20mm
H