Door reversal directions
1.Disconnect from the electricity supply.
2.Remove all loose items, including food, store food in a cool place.
3.Gently lay the fridge/freezer on its back with the top held away from the floor by
4.Remove the feets (B).
5.Remove bottom hinge (A).
6.Remove the freezer door by releasing it from the middle hinge (C).
7.Unscrew the middle hinge.
8.Slide out the fridge door from pin (D), unscrew pin
(D) and then screw it down into the hinge provided on the opposite side, after having removed the small plugs (I) which should then be fitted on the opposite side.
9.Remove blanking plug (E).
10.Remove door closure device (F) from the upper door and refit it on the opposite side of the bottom door.
11.Remove door closure device (F) from the bottom door and refit it on the opposite side of the upper door.
12.Refit the blanking plug (E) on the opposite side.
13.Refit the fridge door and replace the middle hinge to the left hand side.
14.Replace the door and bottom hinge (A) on the opposite side.
15.Refit the feets (B).
Attention
After reversing the door check that the gasket is sealing correctly to the cabinet. If the gasket is not sealing correctly, apply warm air to the
This will make the rubber more supple and allow it to revert to its original shape and seal correctly.
Door closure device
The appliance is provided with a door closure device which guarantee a correct closing of the doors.
B |
A |
B |
D715 |
C |
P R 2 4 / 2 |
D |
D590 |
I |
I |
I |
E |
F |
D752 |
17
