Electrolux ERC 39292 W manual Rear spacers, Electrical connections

Models: ERC 39292 W

1 28
Download 28 pages 53.78 Kb
Page 17
Image 17

Adjust the level of the appliance by screwing out the adjustable foot, or feet, at the bottom of the cabinet using your fingers.

Important

It must be possible to disconnect the appliance from the mains power supply; the plug must therefore be easily accessible after installation.

D200

Rear spacers

In the bag with the documentation, there are two spacers which must be fitted as shown in the figure . Slacken the screws and insert the spacer under the screw head, then re- tighten the screws.

PR153

electrolux 17

Electrical connections

Any electrical work required to install this appliance should be carried out by a qualified electrician or competent person.

WARNING: THIS APPLIANCE MUST BE EARTHED.

The manufacturer declines any liability should this safety measure not be observed.

If the plug that is fitted to your appliance is not suitable for your socket outlet, it must be cut off and the appropriate plug fitted.

Remove the fuse from the cut off plug.

The cut off plug should then be disposed of to prevent the hazard of shocks in case it should be plugged into a 13amp socket in another part of your home.

Important

The wires in the mains lead are coloured in accordance with the following code:

Green and Yellow

- Earth

Blue- Neutral

Brown- Live

If you fit your own plug, the colours of the wires in the mains lead of your appliance may not correspond with the markings identifying the terminals in your plug, proceed as follows:

Page 17
Image 17
Electrolux ERC 39292 W manual Rear spacers, Electrical connections